Read Sony HT-ST3 Service Manual online
HT-ST3
20
6. In the state of step 4, press the [INPUT] button and model
name “HT-ST3” is displayed on the fl uorescent indicator tube.
Each time the [VOLUME +] button is pressed, the display
changes from destination
changes from destination
→ MC (-com) version → SY (sys-
tem) version
→ UI version → TA (AMP) version → DS (DSP)
version
→ BT (Bluetooth) version → NF (NFC) version →
HD (HDMI) version,
→ CE (CEC) version → PF (platform)
version in this order, and returns to the model name display.
NF version
CE version
Model name
Destination
MC version
SY version
PF version
UI version
TA version
HD version
BT version
DS version
(Displayed values in the above fi gure are example)
7. When [INPUT] button is pressed while the each version is dis-
played on the fl uorescent indicator tube, year, month and day
of the software creation is displayed on the fl uorescent indica-
tor tube.
of the software creation is displayed on the fl uorescent indica-
tor tube.
(Displayed values in the above fi gure are example)
When [INPUT] button is pressed again, the display returns to
the each version display.
the each version display.
Releasing method:
Press the [
Press the [
?/1
] button to release the test mode menu.
(When the “K 0” to “K 4” is displayed on the fl uorescent indicator
tube, press the [
tube, press the [
?/1
] button on the remote commander to release
the test mode menu)
2-2. Model Name Display Mode
It can display the model name.
It can display the model name.
Procedure:
1. Enter the test mode menu.
1. Enter the test mode menu.
(Refer to “Setting method of the test mode menu” on page 19)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
“HT-ST3”.
2-3. Destination Display Mode
It can display the destination.
It can display the destination.
Procedure:
1. Enter the test mode menu.
1. Enter the test mode menu.
(Refer to “Setting method of the test mode menu” on page 19)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
“CE2”.
2-4. MC Version Display Mode
It can display the MC (
It can display the MC (
-com) version.
Procedure:
1. Enter the test menu.
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 19)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
“MC.X.XXX” (X.XXX: MC (
-com) version).
(Displayed values in the above fi gure are example)
2-5. Serial Flash Version Display Mode
It can display the SF (serial fl ash) version.
It can display the SF (serial fl ash) version.
Procedure:
1. Enter the test menu.
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 19)
2. Press the [VOLUME +]/[VOLUME –] buttons to select the
“SF.X.XXX” (X.XXX: SF (serial fl ash) version).
(Displayed values in the above fi gure are example)
Click on the first or last page to see other HT-ST3 service manuals if exist.