Read Sony HT-SL60 / HT-SL65 / STR-KSL60 Service Manual online
STR-KSL60
AEP Model
UK Model
SERVICE MANUAL
HOME THEATER SYSTEM
Sony Corporation
Home Audio Company
Published by Sony Engineering Corporation
9-961-218-01
2003H1678-1
© 2003.08
SPECIFICATIONS
Ver 1.0 2003. 08
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
• STR-KSL60 is the receiver section in HT-SL60/SL65.
— Continued on next page —
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo Mode
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
25 W + 25 W
Reference Power Output
(8 ohms 1 kHz, THD 10 %)
FRONT
1)
: 35 W/ch
CENTER
1)
: 35 W
SURR
1)
: 35 W/ch
Depending on the sound field settings and the
source, there may be no sound output.
source, there may be no sound output.
Frequency response
TV/SAT, DVD, VIDEO:
10 Hz – 50 kHz
+0.5/–3 dB (with sound
field and tone by passed)
+0.5/–3 dB (with sound
field and tone by passed)
Inputs (Analog)
TV/SAT, DVD, VIDEO:
Sensitivity: 250 mV
Impedance: 50 kilohms
S/N
Impedance: 50 kilohms
S/N
3)
: 96 dB
(A, 250 mV
4)
)
3) INPUT SHORT (with sound field and tone by
passed).
4) Weighted network, input level.
Outputs
SUB WOOFER
Voltage: 2 V
Impedance: 1 kilohms
Impedance: 1 kilohms
Tone
Gain levels:
±6 dB, 1 dB step
Video section
Inputs
Video:
1 Vp-p, 75 ohms
Outputs
Video:
1 Vp-p, 75 ohms
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono:
18.3 dBf, 2.2
µV/75 ohms
Stereo:
38.3 dBf, 22.5
µV/75
ohms
Usable sensitivity
11.2 dBf, 1
µV/75 ohms
S/N
Mono:
76 dB
Stereo:
70 dB
Harmonic distortion at 1 kHz
Mono:
0.3%
Stereo:
0.5%
Separation
45 dB at 1 kHz
Frequency response
30 Hz – 15 kHz
+0.5/–2 dB
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
Inputs (Digital)
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
DVD, TV/SAT (Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
AM tuner section
Tuning range
With 9-kHz tuning scale: 531 – 1602 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
50 dB/m (at 999 kHz)
S/N
54 dB (at 50 mV/m)
Harmonic distortion
0.5% (50 mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
General
Power requirements
230 V AC, 50/60 Hz
Power consumption
130 W
Power consumption
(during standby mode)
(during standby mode)
0.3 W
Dimensions (w/h/d)
430 56 290 mm
including projecting parts
and controls
including projecting parts
and controls
Mass (Approx.)
4.5 kg
×
×
1)
2
STR-KSL60
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE WITH
MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
1. GENERAL
·········································································· 3
2. TEST MODE
······································································ 4
3. DIAGRAMS
········································································ 5
3-1. BLOCK DIAGRAMS
– MAIN SECTION – ···················································· 6
– DISPLAY/POWER SECTION – ································ 7
– DISPLAY/POWER SECTION – ································ 7
3-2. PRINTED WIRING BOARD
– DIGITAL SECTION – ··············································· 8
3-3. SCHEMATIC DIAGRAM
– DIGITAL (1/2) SECTION – ······································ 9
3-4. SCHEMATIC DIAGRAM
– DIGITAL (2/2) SECTION – ···································· 10
3-5. PRINTED WIRING BOARD
– MAIN/STANDBY SECTION – ······························· 11
3-6. SCHEMATIC DIAGRAM
– MAIN (1/2) SECTION – ·········································· 12
3-7. SCHEMATIC DIAGRAM
– MAIN (2/2)/STANDBY SECTION – ····················· 13
3-8. PRINTED WIRING BOARD
– DISPLAY SECTION – ············································· 14
3-9. SCHEMATIC DIAGRAM
– DISPLAY SECTION – ············································· 15
3-10. IC BLOCK DIAGRAM ·············································· 16
3-11. IC PIN FUNCTION DESCRIPTIONS ······················· 17
3-11. IC PIN FUNCTION DESCRIPTIONS ······················· 17
4. EXPLODED VIEWS
4-1. FRONT PANEL SECTION ········································· 21
4-2. CHASSIS SECTION ··················································· 22
4-2. CHASSIS SECTION ··················································· 22
5. ELECTRICAL PARTS LIST
······································· 23
Unleaded solder
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40
• Unleaded solder melts at a temperature about 40
°C higher than
ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350
°C.
Caution: The printed pattern (copper foil) may peel away if the
heated tip is applied for too long, so be careful!
heated tip is applied for too long, so be careful!
• Strong viscosity
Unleaded solder is more viscous (sticky, less prone to flow) than
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
ordinary solder so use caution not to let solder bridges occur such
as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be damaged
• Notice that the minus side of a tantalum capacitor may be damaged
by heat.
TABLE OF CONTENTS
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-U40 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (20)
AM loop antenna (1)
Remote commander RM-U40 (1)
R6 (size-AA) batteries (2)
Speakers
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
• Sub woofer (1)
Speaker cords (long) (2)
Speaker cords (short) (3)
Speaker foot pads (20)
(HT-SL60, HT-SL55, HT-SL50 and HT-SL40 only)
Speaker foot pads for center speaker (4)
(HT-SL70 and HT-SL65 only)
Sub woofer foot pads (4)
Coaxial digital cord (1)
Monaural audio cord (1)
Colour label for speakers (5)
Coaxial digital cord (1)
Monaural audio cord (1)
Colour label for speakers (5)
Design and specifications are subject to change
without notice.
without notice.
3
STR-KSL60
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
List of Button Locations and Reference Pages
Main unit
How to use this page
Use this page to find the location of buttons that are
mentioned in the text.
mentioned in the text.
Illustration number
r
MUTING qa (14, 19, 37)
R R
Name of button/part
Reference page
Display 6 (28)
DVD (indicator) 3 (19)
INPUT SELECTOR 8 (19, 26)
IR (receptor) 7 (32)
MASTER VOLUME 9 (18, 36)
MUTING qs (14, 19, 37)
PRESET TUNING +/– qd (28)
SOUND FIELD qa (21, 25, 38)
TUNER (indicator) 5 (19)
TV/SAT (indicator) 4 (19)
VIDEO (indicator) 2 (19)
DVD (indicator) 3 (19)
INPUT SELECTOR 8 (19, 26)
IR (receptor) 7 (32)
MASTER VOLUME 9 (18, 36)
MUTING qs (14, 19, 37)
PRESET TUNING +/– qd (28)
SOUND FIELD qa (21, 25, 38)
TUNER (indicator) 5 (19)
TV/SAT (indicator) 4 (19)
VIDEO (indicator) 2 (19)
ALPHABETICAL ORDER
NUMBERS AND SYMBOLS
@/1 (power) 1 (13, 18, 19, 25,
26)
; PLII q; (20)
?/1
1
2
3
4
5
6
7 8
9
0
qs
qd
qa
HT-SL70, HT-SL55, HT-SL50 and HT-SL40 only
Display 6 (28)
DVD (indicator) 3 (19)
INPUT SELECTOR 9 (19, 26)
IR (receptor) 7 (32)
MASTER VOLUME q; (18, 36)
MUTING qa (14, 19, 37)
PRESET TUNING +/– 8 (28)
SOUND FIELD qs (21, 25, 38)
TUNER (indicator) 5 (19)
TV/SAT (indicator) 4 (19)
VIDEO (indicator) 2 (19)
DVD (indicator) 3 (19)
INPUT SELECTOR 9 (19, 26)
IR (receptor) 7 (32)
MASTER VOLUME q; (18, 36)
MUTING qa (14, 19, 37)
PRESET TUNING +/– 8 (28)
SOUND FIELD qs (21, 25, 38)
TUNER (indicator) 5 (19)
TV/SAT (indicator) 4 (19)
VIDEO (indicator) 2 (19)
ALPHABETICAL ORDER
NUMBERS AND SYMBOLS
@/1 (power) 1 (13, 18, 19, 25,
26)
; PLII qd (20)
HT-SL65 and HT-SL60 only
?/1
1
2
3 4 5
6
7
8
9
0
qs
qd
qa
4
STR-KSL60
SECTION 2
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the PLII and the PRESET TUNING + buttons
simultaneously, press the power ?/1 button to turn on the main
power. The message “FACTORY” appears and the present
contents are reset to the default values.
simultaneously, press the power ?/1 button to turn on the main
power. The message “FACTORY” appears and the present
contents are reset to the default values.
RDS AUTOBETICAL MODE
* This mode is installed in the Europe models only. When this mode
is used, the receiver scans the broadcasts that can be received by
the tuner, and sets up the broadcasts. Be sure to start scanning
after connecting the antenna.
the tuner, and sets up the broadcasts. Be sure to start scanning
after connecting the antenna.
* Procedure :
1. Check that the antenna is connected.
2. While depressing the INPUT SELECTOR button, press the
1. Check that the antenna is connected.
2. While depressing the INPUT SELECTOR button, press the
?/1 button to turn on the main power.
3. The message “AUTO-BETICAL SELECT” appears and the
receiver starts scanning.
MICRO/NORMAL SPEAKER SELECTION MODE
* Either the micro speaker mode or normal speaker mode can be
selected.
* Procedure
While depressing the MUTING button, press the power ?/1
button to turn on the main power. Either the message “MICRO
SP.” or “NORM. SP.” appears. Select the desired mode.
button to turn on the main power. Either the message “MICRO
SP.” or “NORM. SP.” appears. Select the desired mode.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the SOUND FIELD button, press the power
?/1 button to turn on the main power. The message
“SF. CLR” appears and initialization is performed.
?/1 button to turn on the main power. The message
“SF. CLR” appears and initialization is performed.
ALL CLEAR MODE
* The all preset value is cleared when this mode is activated.
* Procedure :
* Procedure :
While depressing the PLII and the PRESET TUNING - buttons
simultaneously, press the power ?/1 button to turn on the main
power. The message “CLEARED” appears and clear all preset
value.
simultaneously, press the power ?/1 button to turn on the main
power. The message “CLEARED” appears and clear all preset
value.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the SOUND FIELD and the PRESET TUNING
- buttons simultaneously, press the power ?/1 button to turn on
the main power. The model name, destination and the software
version are displayed.
- buttons simultaneously, press the power ?/1 button to turn on
the main power. The model name, destination and the software
version are displayed.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the MUTING and the INPUT SELECTOR
buttons simultaneously, press the power ?/1 button to turn on
the main power.
“REST 06” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
buttons simultaneously, press the power ?/1 button to turn on
the main power.
“REST 06” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
one after another.
* Procedure:
While depressing the MUTING and the PRESET TUNING -
buttons simultaneously, press the power ?/1 button to turn on
the main power.
buttons simultaneously, press the power ?/1 button to turn on
the main power.
1. All segments turn on.
VIDEO , DVD , TV/SAT and TUNER LED turn on.
2. Press the INPUT SELECTOR button, confirm display
VIDEO , and TUNER LED turn on.
3. Press the INPUT SELECTOR button, confirm display
DVD and TV/SAT LED turn on.
4. Press the INPUT SELECTOR button, all segments and LEDs
turn off.
5. Every pressing of the INPUT SELECTOR button turns on
each segment and LED one after another in the same order.
TUNER CHECK MODE
* Tuner check
* Procedure :
* Procedure :
While depressing the SOUND FIELD and the INPUT
SELECTOR buttons simultaneously, press the power ?/1
button to turn on the main power. “TUN CHK” appears and the
tuner checking is performed.
SELECTOR buttons simultaneously, press the power ?/1
button to turn on the main power. “TUN CHK” appears and the
tuner checking is performed.
L
SW
SL
SR
SSB
C
R
L F E
OPT COAX
RDS
MONO
ST
D.RANGE
dB
kHz
mft.
mft.
MHz
DIGITAL
PRO LOGIC II
PRO LOGIC II
DTS
MPEG-2 AAC
D D
D D
D D
MEMORY
L
SW
SR
S
C
R
L F E
COAX
RDS
MONO
ST
k
m
m
MHz
DIGITAL
PRO LOGIC
PRO LOGIC
MPEG
D D
D D
D D
SL
S B
OPT
D.RANGE
dB
Hz
ft.
II
DTS
-2 AAC
MEMORY
