Read Sony HT-SL50 / HT-SL55 / HT-SL70 / STR-KSL50 Service Manual online
4
STR-KSL50
SECTION 2
TEST MODE
FACTORY PRESET MODE
* All preset contents are reset to the default setting.
* Procedure:
* Procedure:
While depressing the PLII and the PRESET TUNING + buttons
simultaneously, press the power ?/1 button to turn on the main
power. The message “FACTORY” appears and the present
contents are reset to the default values.
simultaneously, press the power ?/1 button to turn on the main
power. The message “FACTORY” appears and the present
contents are reset to the default values.
RDS AUTOBETICAL MODE
* This mode is installed in the Europe models only. When this mode
is used, the receiver scans the broadcasts that can be received by
the tuner, and sets up the broadcasts. Be sure to start scanning
after connecting the antenna.
the tuner, and sets up the broadcasts. Be sure to start scanning
after connecting the antenna.
* Procedure :
1. Check that the antenna is connected.
2. While depressing the INPUT SELECTOR button, press the
1. Check that the antenna is connected.
2. While depressing the INPUT SELECTOR button, press the
?/1 button to turn on the main power.
3. The message “AUTO-BETICAL SELECT” appears and the
receiver starts scanning.
MICRO/NORMAL SPEAKER SELECTION MODE
* Either the micro speaker mode or normal speaker mode can be
selected.
* Procedure
While depressing the MUTING button, press the power ?/1
button to turn on the main power. Either the message “MICRO
SP.” or “NORM. SP.” appears. Select the desired mode.
button to turn on the main power. Either the message “MICRO
SP.” or “NORM. SP.” appears. Select the desired mode.
SOUND FIELD CLEAR MODE
* The preset sound field is cleared when this mode is activated.
Use this mode before returning the product to clients upon
completion of repair.
completion of repair.
* Procedure:
While depressing the SOUND FIELD button, press the power
?/1 button to turn on the main power. The message
“SF. CLR” appears and initialization is performed.
?/1 button to turn on the main power. The message
“SF. CLR” appears and initialization is performed.
ALL CLEAR MODE
* The all preset value is cleared when this mode is activated.
* Procedure :
* Procedure :
While depressing the PLII and the PRESET TUNING - buttons
simultaneously, press the power ?/1 button to turn on the main
power. The message “CLEARED” appears and clear all preset
value.
simultaneously, press the power ?/1 button to turn on the main
power. The message “CLEARED” appears and clear all preset
value.
SOFTWARE VERSION DISPLAY MODE
* The software version is displayed.
* Procedure:
* Procedure:
While depressing the SOUND FIELD and the PRESET TUNING
- buttons simultaneously, press the power ?/1 button to turn on
the main power. The model name, destination and the software
version are displayed.
- buttons simultaneously, press the power ?/1 button to turn on
the main power. The model name, destination and the software
version are displayed.
KEY CHECK MODE
* Button check
* Procedure:
* Procedure:
While depressing the MUTING and the INPUT SELECTOR
buttons simultaneously, press the power ?/1 button to turn on
the main power.
“REST 06” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
buttons simultaneously, press the power ?/1 button to turn on
the main power.
“REST 06” appears.
Every pressing of any button other than ?/1 counts down the
buttons. The buttons which are already counted once are not
counted again. When all buttons are pressed “REST 00” appears.
FLUORESCENT INDICATOR TUBE TEST MODE
* All fluorescent segments are tested. When this test is activated,
all segments turn on at the same time, then each segment turns on
one after another.
one after another.
* Procedure:
While depressing the MUTING and the PRESET TUNING -
buttons simultaneously, press the power ?/1 button to turn on
the main power.
buttons simultaneously, press the power ?/1 button to turn on
the main power.
1. All segments turn on.
VIDEO , DVD , TV/SAT and TUNER LED turn on.
2. Press the INPUT SELECTOR button, confirm display
VIDEO , and TUNER LED turn on.
3. Press the INPUT SELECTOR button, confirm display
DVD and TV/SAT LED turn on.
4. Press the INPUT SELECTOR button, all segments and LEDs
turn off.
5. Every pressing of the INPUT SELECTOR button turns on
each segment and LED one after another in the same order.
TUNER CHECK MODE
* Tuner check
* Procedure :
* Procedure :
While depressing the SOUND FIELD and the INPUT
SELECTOR buttons simultaneously, press the power ?/1
button to turn on the main power. “TUN CHK” appears and the
tuner checking is performed.
SELECTOR buttons simultaneously, press the power ?/1
button to turn on the main power. “TUN CHK” appears and the
tuner checking is performed.
DSP TEST MODE
* DSP tests are performed.
* Procedure :
* Procedure :
There are two different methods to enter the test mode.
(1) While depressing the INPUT SELECTOR and PRESET
TUNING - buttons simultaneously, press the power ?/1 button
to turn on the main power.
to turn on the main power.
(2) When the set is turned on, by using the remote controller, press
the ENTER button three times, then press the MAIN MENU
button one time and thenpress the MUTING button one time.
button one time and thenpress the MUTING button one time.
• Select the item by pressing Cursor button (
V or v ).
• Select the function by pressing Cursor button (
B or b ).
L
SW
SL
SR
SSB
C
R
L F E
OPT COAX
RDS
MONO
ST
D.RANGE
dB
kHz
mft.
mft.
MHz
DIGITAL
PRO LOGIC II
PRO LOGIC II
DTS
MPEG-2 AAC
D D
D D
D D
MEMORY
L
SW
SR
S
C
R
L F E
COAX
RDS
MONO
ST
k
m
m
MHz
DIGITAL
PRO LOGIC
PRO LOGIC
MPEG
D D
D D
D D
SL
S B
OPT
D.RANGE
dB
Hz
ft.
II
DTS
-2 AAC
MEMORY
Click on the first or last page to see other HT-SL50 / HT-SL55 / HT-SL70 / STR-KSL50 service manuals if exist.