Read Sony HT-K5 / STR-K5 Service Manual online
7
7
STR-K5
STR-K5
SECTION 3
TEST MODE
FACTORY PRESET MODE
All preset contents are reset to the default setting.
Procedure:
Procedure:
1. While pressing the [2CH] and [MOVIE] buttons, press
the
I/
1
button to turn on the main power.
2. The message “FACTORY” appears and the present contents
are reset to the default values.
FL CHECK MODE
All fluorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [DISPLAY] and [A.F.D.] buttons, press
the
I/
1
button to turn on the main power.
2. All segments and all LEDs turn on.
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [KARAOKE ON/OFF], [SCORE] LEDs turn
3. Press the [INPUT SELECTOR] button.
4. Half of segments and [KARAOKE ON/OFF], [SCORE] LEDs turn
on.
5. Press the [INPUT SELECTOR] button once again.
6. Others half of segments and [VOCAL SELECT], [D.B.F.B.] LEDs
6. Others half of segments and [VOCAL SELECT], [D.B.F.B.] LEDs
turn on.
7. Press the [INPUT SELECTOR] button once again.
8. All segments and all LEDs turn off.
8. All segments and all LEDs turn off.
VERSION MODE
When this mode is used, the model, the destination and the software
version number are displayed.
Procedure:
version number are displayed.
Procedure:
1. While pressing the [DISPLAY] and [TUNING +] buttons, press
the
I/
1
button to turn on the main power.
2. The model, the destination and the software version number
appear.
KEY CHECK MODE
This mode is used to check the key.
Procedure:
Procedure:
1. While pressing the [DISPLAY] and [2CH] buttons, press
the
I/
1
button to turn on the main power.
2. The message “REST 15” appears.
3. Every pressing of any button other than the
3. Every pressing of any button other than the
I/
1
button counts
down the buttons. The buttons which are already counted once
are not counted again.
are not counted again.
4. When all buttons are pressed, the message “REST 00” appears.
SOUND FIELD CLEAR MODE
The preset sound field is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [2CH] button, press the
I/
1
button to turn
on the main power.
2. The message “SF. CLR.” appears and initialization is
performed.
SPEAKER SIZE SELECTION MODE
Either the normal speaker or micro satellite speaker can be selected.
Procedure:
Procedure:
1. While depressing the [DISPLAY] and the [TUNING --] buttons
simultaneously, press the
I/
1
button to turn on the main power.
2. Either the message “NORM. SP.” or “MICRO SP.” appears
for a moment and select the desired speaker size.
COMMAND MODE SELECTION MODE
The command mode (AV1 or AV2) of the remote commander can
be selected.
Procedure:
be selected.
Procedure:
1. While depressing the [TUNING --] button, press the
I/
1
button
to turn on the main power.
2. Either the message “C.MODE.AV 1” or “C.MODE.AV 2”
appears for a moment and select the desired mode.
Click on the first or last page to see other HT-K5 / STR-K5 service manuals if exist.