Read Sony HT-K5 / SA-WP9000 / SS-BSP5K / SS-CNP5K / SS-SRP5K Service Manual online
SA-WP9000/SS-BSP5K/CNP5K/SRP5K
3
Note:
Follow the disassembly procedure in the numerical order given.
1-1. LOUDSPEAKER (SA-WP9000)
SECTION 1
DISASSEMBLY
5
connector
6
front panel assy
8
two harnesses
4
ten bosses
9
loudspeaker (25cm)
(SP6)
(SP6)
7
four screws
(+BVTP4
(+BVTP4
×
20) (TYPE1)
3
Raise the front panel assy a little by little
from bottom to top of the set.
from bottom to top of the set.
1
Insert a flat-tip screwdriver into a slit
in the bottom of the set
to raise the front panel assy a little.
in the bottom of the set
to raise the front panel assy a little.
2
Insert the jig (J-2051-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
made by inserting the screwdriver,
and raise the front panel assy gradually.
2
Insert the jig (J-2051-238-A) into a space
made by inserting the screwdriver,
and raise the front panel assy gradually.
made by inserting the screwdriver,
and raise the front panel assy gradually.
Note 2: Remove the front panel assy by paying attention particulaly
to the periphyery of ten bosses
where the front panel assy bonded tightly.
where the front panel assy bonded tightly.
Note 3: Take care not to damage the set
by applying an excessive force.
Note 1: front panel assy must be opend/raised
from right hand side towards left hand side
to avoid damage of LED wire and connector.
to avoid damage of LED wire and connector.
Click on the first or last page to see other HT-K5 / SA-WP9000 / SS-BSP5K / SS-CNP5K / SS-SRP5K service manuals if exist.