Read Sony HT-FS1 / SA-FS1 / SS-FS1 Service Manual online
SA-FS1/SS-FS1
6
SECTION 2
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Remote control
Here describes the buttons for amplifier
operation only. See page 30 for the buttons for
operation of the connected components.
operation only. See page 30 for the buttons for
operation of the connected components.
• Point the remote at the remote sensor
in the front
panel display.
• The 5,
), and
+ buttons have a tactile dot. Use
it as a guide during operation.
Note
Tip
1
2
3
4
6
7
8
0
ENTER
9
THEATRE
TV
AV
TV
BD
DVD
SAT
TOP MENU MENU
BD/DVD
RETURN/EXIT
TV
F1
F2
AMP MENU
CLEAR
DISPLAY
SOUND
FIELD
LEVEL
MODE
A/B
DIGITAL
ANALOG
DMPORT
+
G
O
R
P
-
G
O
R
P
'
(
H
G
)
.
N
9
Y
5
SYSTEM STANDBY
MENU/HOME
TOOLS/
OPTIONS
" (on/standby)
Press to turn the system on or off.
To save the power in standby mode
Press
while the system turns on.
To enter power saving mode, make sure that
the system is in the following status.
the system is in the following status.
– “CTRL: HDMI” is set to “CTRL OFF”
(page 25).
To cancel standby mode, press
once.
# Input buttons
Press one of the buttons to select the
component you want to use.
The buttons are factory assigned to control
Sony components. You can change the
factory settings of the input buttons to suit
the components in your system. For details,
refer to “Changing the input button
assignments of the remote” (page 33).
component you want to use.
The buttons are factory assigned to control
Sony components. You can change the
factory settings of the input buttons to suit
the components in your system. For details,
refer to “Changing the input button
assignments of the remote” (page 33).
$ SOUND FIELD
Press to select the sound field (page 24).
% LEVEL MODE
Press to adjust the level of the active
subwoofer (page 34).
subwoofer (page 34).
& AMP MENU
Press to display the menu of the system
(page 35).
(page 35).
'
(MUTING)
Press to turn off the sound.
(
+/–
Press to adjust the volume.
) $, 9, Y, D or
Press
$, 9, Y or D to select the settings.
Then press
to enter the selection.
Top panel (Active subwoofer)
" (on/standby)
Press to turn the system on or off.
# INPUT SELECTOR
Press to select the input source to play back.
$ VOLUME +/–
Press to adjust the volume level.
INPUT SELECTOR
-
VOLUME +
Front panel display (Active subwoofer)
About the indications in the front panel display
" POWER / ACTIVE STANDBY indicator
Lights as follows:
Green: The system is turned on.
Amber: Control for HDMI function is
working while the system is turned
off.
off.
Off:
The system is turned off, and the
Control for HDMI function is not
working.
Control for HDMI function is not
working.
# Audio decoding indicators
Lights up according to the audio input
signals.*
signals.*
* When “
PLII” lights up, S-Force PRO Front
Surround is applied after Dolby Pro Logic II.
$ SLEEP (38)
Flashes when the sleep timer function is
active.
active.
% HDMI (13, 40)
Lights up when HDMI equipment is in use.
& COAX/OPT
Lights up according to the cable that you are
using.
using.
' Remote sensor
Point the remote here.
POWER /
ACTIVE STANDBY
Click on the first or last page to see other HT-FS1 / SA-FS1 / SS-FS1 service manuals if exist.