HT-DDW870, STR-K870P - Sony Audio Service Manual (repair manual). Page 2

Read Sony HT-DDW870 / STR-K870P Service Manual online

2
STR-K870P
1) Measured under the following conditions:
2) Depending on the sound field settings and the 
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range
87.5 - 108.0 MHz
Antenna
FM wire antenna
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code US, CND
With 10-kHz tuning scale:  530 - 1,710 kHz
3)
With 9-kHz tuning scale:  531 - 1,710 kHz
3)
Models of area code AEP, UK, SP, AUS
With 9-kHz tuning scale: 531 – 1,602 kHz
Models of area code E51
With 10-kHz tuning scale:  530 - 1,610 kHz
3)
With 9-kHz tuning scale:  531 - 1,602 kHz
3)
Models of area code MX
With 10-kHz tuning scale:  530 - 1,610 kHz
Antenna
Loop antenna
Intermediate frequency
450 kHz
3) You can change the AM tuning scale to 9 kHz or 
10 kHz. After tuning in any AM station, turn off the 
receiver. While holding down PRESET TUNING + 
or TUNING +, press ?/1. All preset stations will be 
erased when you change the tuning scale. To reset 
the scale to 10 kHz (or 9 kHz), repeat the procedure.
Video section
Inputs/Outputs
Video:
1 Vp-p, 75 ohms
General
Power requirements
Area code
Power requirements
US, CND
120 V AC, 60 Hz
MX
127 V AC, 60 Hz
AEP, UK, SP
230 V AC, 50 Hz
AUS, E51
240 V AC, 50 Hz
SA-CD/CD, MD/TAPE, 
DVD, VIDEO 1, 2, 3
Sensitivity: 800 mV
Impedance: 50 k ohms
DVD (Coaxial)
Sensitivity: –
Impedance: 75 ohms
VIDEO 2, SA-CD/CD 
(Optical)
Sensitivity: –
Impedance: –
MD/TAPE (OUT), 
VIDEO 1 (AUDIO OUT)
Voltage: 800 mV
Impedance: 10 k ohms
SUB WOOFER
Voltage: 2 V
Impedance: 1 k ohm
Gain levels
±6 dB, 1 dB step
Area code
Power requirements
US, CND
120 V AC, 60 Hz
MX
1
2
27 V AC, 60 Hz
AEP, UK
30 V AC, 50/60 Hz
AUS
240 V AC, 50 Hz
SP
220 – 230 V AC,
50/60 Hz
E51
120/220/240 V AC,
50/60 Hz
Power consumption
Power consumption (during standby mode)
0.2 W
Dimensions (w/h/d) (Approx.)
430 
× 157.5 × 310 mm
(17 
× 6 1/4 × 12 1/4 inches)
including projecting parts 
and controls
Mass (Approx.)
8.0 kg (17 lb 11 oz)
Area code
Power consumption
US
170 W
CND
230 VA
AEP, UK, AUS, SP, MX, 
E51
190 W 
Design and specifications are subject to change 
without notice
•  Abbreviation
   AUS
: Australian model
   CND : Canadian model
   E51
: Chilean and Peruvian models
   MX
: Mexican model
   SP
: Singapore model
Page of 56
Display

Click on the first or last page to see other HT-DDW870 / STR-K870P service manuals if exist.