Read Sony HT-7200DH / STR-K7200 Service Manual online
STR-K7200
5
About the indicators on the display
MEMORY
L
C
R
SL S SR
SW
LFE
D.RANGE MONO
ST
COAX
HDMI
D
DTS
OPT
PLII
CAT
PL
T
R
G
R
RE
R
RB
Name
Function
" SW
Lights up when the audio signal
is output from the SUB
WOOFER jack.
is output from the SUB
WOOFER jack.
# LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
$ D
Lights up when the receiver is
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO”.
decoding Dolby Digital signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is set to
“AUTO”.
% PL/
PLII
“PL” lights up when the
receiver applies Pro Logic
processing to 2 channel signals
in order to output the center and
surround channel signals.
processing to 2 channel signals
in order to output the center and
surround channel signals.
“PLII” lights up when the
Pro Logic II Movie or Music
decoder is activated.
decoder is activated.
& OPT
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
is set to “AUTO” and the source
signal is a digital signal being
input through the OPTICAL
jack.
Name
Function
* Tuner
indicators
Lights up when using the
receiver to tune in radio stations,
etc.
receiver to tune in radio stations,
etc.
+ Preset
station
indicators
indicators
Lights up when using the
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see.
receiver to tune in radio stations
you have preset. For details on
presetting radio stations, see.
, D.RANGE
Lights up when dynamic range
compression is activated.
compression is activated.
- COAX
Lights up when INPUT MODE
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
is set to “AUTO” and the source
signal is a digital signal being
input through the COAXIAL
jack.
. HDMI
Lights up when the receiver
recognizes a component
connected via an HDMI IN jack.
recognizes a component
connected via an HDMI IN jack.
/ Playback
channel
indicators
indicators
L
R
C
SL
SR
S
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound.
Front Left
Front Right
Center (monaural)
Surround Left
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Example:
Recording format (Front/
Surround): 3/2.1
Sound Field: A.F.D. AUTO
L
C
R
SL
SR
SW
' DTS
Lights up when the receiver is
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
decoding DTS signals.
Note
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is set to
“AUTO”.
( CAT
Lights up when category mode
is set to “ONE CAT” during
XM Radio operation.
is set to “ONE CAT” during
XM Radio operation.
) MEMORY
Lights up when a memory
function, such as Preset
Memory, etc., is activated.
function, such as Preset
Memory, etc., is activated.
Click on the first or last page to see other HT-7200DH / STR-K7200 service manuals if exist.