Read Sony HS-WA1 Service Manual online
SERVICE MANUAL
Published by Sony Techno Create Corporation
Sony Corporation
Audio&Video Business Group
HS-WA1
SPECIFICATIONS
LOCAL AUDIO WALL PORT
9-889-382-01
2009A04-1
©
2009.01
US Model
Ver. 1.0 2009.01
PARTS LIST
4-108-086-01 PLATE (S), ORNAMENTAL (COVER PANEL)
4-113-751-11
MANUAL, INSTALLATION (ENGLISH)
4-123-926-01 SCREW (WALL PLATE) (for COVER PANEL)
4-874-614-82 +BV TAPPING SCREW TYPE-1 3.5
(for SINGLE GANG J-BOX)
A-1557-944-A OVERALL
ASSY
(HS-WA1)
Ref. No.
Part No.
Description
Remark
Input and output terminals
RJ45: T568B Terminated. IJ(only for connection to HS-KP1
(Keypad))
RJ45: T568B Terminated. IJ(only for connection to HS-KP1
(Keypad))
(IDC 19.5 V DC 19.5 V included)
Pin jack:
AUDIO IN: 50 kilohms terminal
AUDIO OUT: 1 kilohm impedance
IR REMOTE OUT:
Only for connecting an IR fl asher to operate a
Sony
component.
General
Power consumption:
Power consumption:
DC 19.5 V, 0.15 A (powered by HS-KP1)
Operating temperature:
0 °C - 30 °C (32 °F - 86 °F)
Storage temperature:
– 20 °C - 60 °C (– 4 °F - 140 °F)
Dimensions (wall port): 46 × 108 × 66mm
(1
(1
7
/
8
× 4
1
/
4
× 2
5
/
8
inches) (w/h/d)
Dimensions (cover panel): 80 × 124 × 5.5 mm
(3
(3
1
/
4
× 5 ×
1
/
4
inches) (w/h/d)
Mass:
125 g (4.4 oz) (cover panel included)
Design and specifi cations are subject to change without notice.
Unpacking
• HS-WA1 (1)
• Cover panel (1)
• Screws for single gang J-box (long) (2)
• Screws for cover panel (short) (2)
• Installer’s manual (this manual) (1)
• HS-WA1 (1)
• Cover panel (1)
• Screws for single gang J-box (long) (2)
• Screws for cover panel (short) (2)
• Installer’s manual (this manual) (1)
The other units referred to in this manual are optional. Prepare necessary
units depending on your system.
units depending on your system.
Connecting the CAT5 cables to the wall port
When the wall is finished, connect the CAT5 cables to the rear of the wall port.
1
Attach RJ45 connectors to the ends of the CAT5 cables.
For details, see “Connecting RJ45 connectors to CAT5 cables”.
2
Connect the CAT5 cables so that the letters such as * or +
indicated on the wall port and Keypad (HS-KP1) match each other.
indicated on the wall port and Keypad (HS-KP1) match each other.
OUT
IN
L
R
AUDIO
IR RE
MOTE
OUT
Rear of the wall port
HS-WA1
REVISION HISTORY
Checking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2009.01
New
Display