Read Sony HMZ-T2 (serv.man2) Service Manual online
1. Press [MENU] button on the Head Mounted Unit to enter the MENU mode.
2. Press five buttons in order of [↑] → [↑] → [↓] → [↓] → [→] while holding down the VOL[ － ] button.
3. Release from the VOL[ － ] button.
2. Press five buttons in order of [↑] → [↑] → [↓] → [↓] → [→] while holding down the VOL[ － ] button.
3. Release from the VOL[ － ] button.
[Notes]
1. This procedure will be canceled if not finish the operation within 15 seconds or press buttons in the wrong order.
2. The MENU mode is released in the following cases.
・ Press the [MENU] or [←] button
・ No operation for 90 seconds
・ Power off
1. This procedure will be canceled if not finish the operation within 15 seconds or press buttons in the wrong order.
2. The MENU mode is released in the following cases.
・ Press the [MENU] or [←] button
・ No operation for 90 seconds
・ Power off
1
press [Menu] button
2
hold down VOL [ — ] button
6
release
3
press twice
4
press twice
5
press once
Mode
Item
Maintain a
Power OFF
Detail
Menu
Default
Opeartion
Cautions
Version Display of Version
cmd6
FPGA TPG
No
Color ba
・ Color bar is displayed by the signal from FPGA of HMD.
・ Any sound included HDMI input are changed to 1kHz sound and output
・ Any sound included HDMI input are changed to 1kHz sound and output
only
channel.
・ Another channel (center etc…) output no sound.
The MENU mode will be released
in the no operation for 90
seconds. In this case, turn off
the unit once and power on again.
in the no operation for 90
seconds. In this case, turn off
the unit once and power on again.
White
・ White Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Black
・ Black Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Red
・ Red Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Green
・ Green Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Blue
・ Blue Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Edge
・ Edge Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
cmd8
EMMA TPG
No
Whit
・ White Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Black
・ Black Test Pattern is displayed by the signal from EMMA.
・ Original sound is output.
・ Original sound is output.
Red
・ Red Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Green
・ Green Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Blue
・ Blue Test Pattern is displayed by the signal from EMMA.
・ Original sound is output.
・ Original sound is output.
White
・ Panel Test Pattern (inside is black/outside is white) is displayed by the
signal from EMMA..
・ Original sound is output.
k
・ Panel Test Pattern (inside is white/outside is black) is displayed by the
signal from EMMA..
・ Original sound is output
cmd9
Quantity survey time
of PANEL
of PANEL
Yes
OK
K: Reset a quantity survey of displayed time.
Cancel
cmd10
Make transparent
menu on back
menu on back
No
on
off
On: Part of menu screen is cleared. (For confirmation of image quality)
off
Mode
Item
Maintain a
Power OFF
Detail
Menu
Default
Opeartion
Cautions
Version Display of Version
cmd6
FPGA TPG
No
Color ba
・ Color bar is displayed by the signal from FPGA of HMD.
・ Any sound included HDMI input are changed to 1kHz sound and output
・ Any sound included HDMI input are changed to 1kHz sound and output
only
.
・ Another channel (center etc…) output no sound.
The MENU mode will be released
in the no operation for 90
seconds. In this case, turn off
the unit once and power on again.
in the no operation for 90
seconds. In this case, turn off
the unit once and power on again.
White
・ White Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Black
・ Black Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Red
・ Red Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Green
・ Green Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Blue
・ Blue Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
Edge
・ Edge Test Pattern is displayed by the signal from FPGA.
・ Original sound is output.
・ Original sound is output.
cmd8
EMMA TPG
No
Whit
・ White Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Black
・ Black Test Pattern is displayed by the signal from EMMA.
・ Original sound is output.
・ Original sound is output.
Red
・ Red Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Green
・ Green Test Pattern is displayed by the signal from EMMA
・ Original sound is output.
・ Original sound is output.
Blue
・ Blue Test Pattern is displayed by the signal from EMMA.
・ Original sound is output.
・ Original sound is output.
White
・ Panel Test Pattern (inside is black/outside is white) is displayed by the
signal from EMMA..
・ Original sound is output.
k
・ Panel Test Pattern (inside is white/outside is black) is displayed by the
signal from EMMA..
・ Original sound is output
・ Checksums for firmware are displayed.
cmd9
Quantity survey time
of PANEL
of PANEL
Yes
OK
OK: Reset a quantity survey of displayed time.
Cancel
cmd10
Make transparent
menu on back
ground.
menu on back
ground.
No
on
off
On: Part of menu screen is cleared. (For confirmation of image quality)
off
cmd12
CheckSum Info.
HMZ-T2
SECTION 1
SERVICE NOTE
1-1
1-1. Procedure to enter Service Mode
SERVICE MODE MENU
Table-1
Click on the first or last page to see other HMZ-T2 (serv.man2) service manuals if exist.