Read Sony HMD-A200 / HMD-A220 (serv.man2) Service Manual online
1-1
SECTION 1
GENERAL
The operating instructions mentioned here are partial abstracts
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
from the Operating Instruction Manual. The page numbers of
the Operating Instruction Manual remein as in the manual.
4
Precautions
Warning on power connections
• Use the supplied power cord. If you use a different power cord,
be sure that it is compatible with your local power supply.
For the customers in the UK
If you use the monitor in the UK, be sure to use the supplied UK
power cable.
For the customers in the UK
If you use the monitor in the UK, be sure to use the supplied UK
power cable.
• Before disconnecting the power cord, wait at least 30 seconds
after turning off the power to allow the static electricity on the
screen’s surface to discharge.
screen’s surface to discharge.
• After the power is turned on, the screen is demagnetized
(degaussed) for about 5 seconds. This generates a strong
magnetic field around the screen which may affect data stored
on magnetic tapes and disks placed near the monitor. Be sure to
keep magnetic recording equipment, tapes, and disks away
from the monitor.
magnetic field around the screen which may affect data stored
on magnetic tapes and disks placed near the monitor. Be sure to
keep magnetic recording equipment, tapes, and disks away
from the monitor.
Installation
Do not install the monitor in the following places:
• on surfaces (rugs, blankets, etc.) or near materials (curtains,
• on surfaces (rugs, blankets, etc.) or near materials (curtains,
draperies, etc.) that may block the ventilation holes
• near heat sources such as radiators or air ducts, or in a place
subject to direct sunlight
• in a place subject to severe temperature changes
• in a place subject to mechanical vibration or shock
• on an unstable surface
• near equipment which generates magnetism, such as a
• in a place subject to mechanical vibration or shock
• on an unstable surface
• near equipment which generates magnetism, such as a
transformer or high voltage power lines
• near or on an electrically charged metal surface
Maintenance
• Clean the screen with a soft cloth. If you use a glass cleaning
liquid, do not use any type of cleaner containing an anti-static
solution or similar additive as this may scratch the screen’s
coating.
solution or similar additive as this may scratch the screen’s
coating.
• Do not rub, touch, or tap the surface of the screen with sharp or
abrasive items such as a ballpoint pen or screwdriver. This type
of contact may result in a scratched picture tube.
of contact may result in a scratched picture tube.
• Clean the cabinet, panel and controls with a soft cloth lightly
moistened with a mild detergent solution. Do not use any type
of abrasive pad, scouring powder or solvent, such as alcohol or
benzene.
of abrasive pad, scouring powder or solvent, such as alcohol or
benzene.
Transportation
When you transport this monitor for repair or shipment, use the
original carton and packing materials.
original carton and packing materials.
Use of the stand
Insert the supplied stand into the groove to adjust the angle of the
monitor. You can use the stand in either the vertical or horizontal
position.
monitor. You can use the stand in either the vertical or horizontal
position.
Use of the groove on top (HMD-A200 only)
You can put a photo frame or CD case in the groove.
Note
Never use the slit for any other purpose.
Use of the headphones’ hook (HMD-A100 only)
Insert the supplied hook into one of the holes (ten on both the left
and right sides) on either the left or right side of the monitor.
and right sides) on either the left or right side of the monitor.
Note
Never hang heavy objects from the hook other than the headphones.
The equipment should be installed near an easily accessible
outlet.
outlet.
Example of plug types
for 100 to 120 V AC
for 200 to 240 V AC
for 240 V AC only
Side
5
GB
Identifying parts and controls
See the pages in parentheses for further details. (Model HMD-
A200 is used for illustration purposes.)
A200 is used for illustration purposes.)
1
Control button (page 9)
The control button is used to display the menu and make
adjustments to the monitor, including brightness and contrast
adjustments.
adjustments to the monitor, including brightness and contrast
adjustments.
2 1
(power) switch and indicator (pages 6, 13, 16)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
lights up in green when the monitor is turned on, and either
flashes in green and orange, or lights up in orange when the
monitor is in power saving mode.
3
AC IN connector (page 6)
This connector provides AC power to the monitor.
4
Video input connector (HD15) (page 6)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
positive) and sync signals.
* DDC (Display Data Channel) is a standard of VESA.
5
USB (universal serial bus) downstream connectors
(page 7)
(page 7)
Use these connectors to link USB peripheral devices to the
monitor.
monitor.
6
USB (universal serial bus) upstream connector
(page 7)
(page 7)
Use this connector to link the monitor to a USB compliant
computer.
computer.
MENU
AC IN
Rear
Front
Pin No.
Signal
1
Red
2
Green
(Composite Sync on Green)
(Composite Sync on Green)
3
Blue
4
ID (Ground)
5
DDC Ground*
6
Red Ground
7
Green Ground
8
Blue Ground
9
–
10
Ground
11
ID (Ground)
12
Bi-Directional Data (SDA)*
13
H. Sync
14
V. Sync
15
Data Clock (SCL)*
1 2
3 4 5
8
7
6
11 12 13 14 15
10
9
Click on the first or last page to see other HMD-A200 / HMD-A220 (serv.man2) service manuals if exist.