Read Sony HCD-ZX70DVD Service Manual online
4
2.
SERVICING NOTE
CDM SHIP MODE
In sending the set back to the customers, place the set in the CDM
SHIP MODE through the procedure given below.
If the dummy disc is not inserted in the set returned from the
customers, ask customers for sending it or add new dummy disc
(Part No.: 4-228- 906-01 DISC, DUMMY).
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the Z 1 button to open the disc tray 1, and put the dummy
SHIP MODE through the procedure given below.
If the dummy disc is not inserted in the set returned from the
customers, ask customers for sending it or add new dummy disc
(Part No.: 4-228- 906-01 DISC, DUMMY).
Procedure:
1. Press the I/1 button to turn the power on.
2. Press the Z 1 button to open the disc tray 1, and put the dummy
disc.
3. Press the I/1 button, and the disc tray will close and chucking
the disc automatically.
4. Unplug the power cord when the demo display or clock display
appears on the fluorescent display tube.
Note:
Peel off the protection sheets on both sides, if present on the dummy
disc.
disc.
NOTES ON INSTALLING OPTICAL PICK-UP
Note:
Follow the assembly procedure in the numerical order given.
3
three step screws
1
insulator
1
insulator
1
insulator
2
6
wire (flat type) (21 core) (CN002)
7
wire (flat type) (13 core) (CN001)
8
Remove the solder.
5
two screws
(BVTP 2.6)
(BVTP 2.6)
4
TK board
optical pick-up
(KHM-220AAA)
(KHM-220AAA)
Note: Installing optical pick-up,
remove the solder for short.
Click on the first or last page to see other HCD-ZX70DVD service manuals if exist.