HCD-ZX50MD - Sony Audio Service Manual (repair manual). Page 32

32

1. Entering the continuous playback mode

1

Set the disc in the unit. (Whichever recordable discs or discs for playback only are available.)

2

Move the multi-stick and display “CPLAY1MODE”(C34).

3

Press the  PUSH ENTER  button to change the display to “CPLAY1MID”.

4

When access completes, the display changes to “C = 

 AD = 

”.

Note : The numbers “ ” displayed show you error rates and ADER.

2. Changing the parts to be played back

1

Press the  PUSH ENTER  button during continuous playback to change the display as below.

When pressed another time, the parts to be played back can be moved.

2

When access completes, the display changes to “C = 

 AD = 

”.

Note : The numbers “ ” displayed show you error rates and ADER.

3. Ending the continuous playback mode

1

Press the  CLEAR  button while REC IT is lit. The display will change to “CPLAY1MODE”(C34).

2

To remove the disc, press the  MD Z  button while REC IT is off.

Note : The playback start addresses for IN, MID, and OUT are as follows.

IN

40h cluster

MID 300h cluster
OUT 700h cluster

1. Entering the continuous recording mode

1

Set a recordable disc in the unit.

2

Move the multi-stick and display “CREC 1MODE” (C35).

3

Press the  PUSH ENTER  button to change the display to “CREC 1MID”.

4

When access completes, the display changes to “CREC1 (

)” and  

  lights up.

Note : The numbers “ ” displayed shows you the recording position addresses.

2. Changing the parts to be recorded

1

When the  PUSH ENTER  button is pressed during continuous recording, the display changes as below.

When pressed another time, the parts to be recorded can be changed.   

  goes off.

2

When access completes, the display changes to “CREC 1(

)” and  

  lights up.

Note : The numbers “ ” displayed shows you the recording position addresses.

3. Ending the continuous recording mode

1

Press the  CLEAR  button while REC IT is lit. The display changes to “CREC 1MODE” (C35 ) and  

  goes off.

2

To remove the disc, press the  MD Z  button while REC IT is off.

Note 1 : The recording start addresses for IN, MID, and OUT are as follows.

IN

40h cluster

MID

300h cluster

OUT

700h cluster

Note 2 : Press the  CLEAR  button while REC IT is lit can be used to stop recording anytime.
Note 3 : Do not perform continuous recording for long periods of time above 5 minutes.
Note 4 : During continuous recording, be careful not to apply vibration.

“CPLAY1MID” t “CPLAY1OUT” t “CPLAY1IN”  

“CREC 1MID” t “CREC 1OUT” t “CREC 1IN”