HCD-ZX10D, LBT-ZX10D - Sony Audio Service Manual (repair manual). Page 17

17

This mode let you lock the disc tray. When this mode is activated,
the disc tray will not open when

Z

 

OPEN/CLOSE

  button or

[EX-CHANGE] button is pressed. The message “LOCKED” will be
displayed in on the fluorescent indicator tube.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press two buttons of

x

(DVD) and

Z

 

OPEN/CLOSE

  

simul-

taneously and hold down until “LOCKED” or  “UNLOCKED”
displayed on the fluorescent indicator tube (around 5 seconds).

This mode let you switch from VIDEO to SAT and vice-versa.
Procedure:

1. Set to the power off state.
2. Press two buttons of [FUNCTION]  and

I

/1

simultaneously.

The set power on automatically and the function will changed
to SAT. Do the same procedures again to change from SAT to
VIDEO.

This mode let you change the color system of the video output from
PAL to NTSC or vice-versa.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press the

I

/1

button to turn the power off.

4. Press two buttons of

x

(TAPE B) and

I

/1

simultaneously.

The set will power on automatically.

5. The message “COLOR SYSTEM PAL” or “COLOR

SYSTEM NTSC” will be displayed on the fluorescent
indicator tube

This mode let you change the video signal format from progressive
format to interlace format if you accidentally change the
COMPONENT OUT settings in DVD SETUP MENU to progressive
and your TV cannot accept progressive signal.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press two buttons of

x

(DVD) and [DVD MENU]  simul-

taneously.

The number of repeat for disc playback is 5 times when the repeat
mode is “REPEAT ALL”. This mode enables the disc to repeat
playback for limitless times.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press three buttons of

x

(TAPE B), [TUNER ENTER]

 

, and

[REPEAT] simultaneously to enter the repeat 5 limit off mode
and the fluorescent indicator tube displays “LIMIT OFF”.

4. To release from this mode, operate the cold reset.

This mode moves the optical pick-up to the position durable to
vibration and clears all data including preset data stored in the RAM
to initial conditions. Use this mode when returning the set to the
customer after repair.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press two buttons of [EX-CHANGE] and

I

/1

simultaneously.

The set will power off automatically.

4. After the “STANDBY” blinking display finish, a message

“LOCK” is displayed on the fluorescent indicator tube and
the DVD ship mode is set.

This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press two buttons of [REPEAT]

 

and

I

/1

simultaneously. The

set will power off automatically.

4. After the “STANDBY” blinking display finish, a message

“LOCK” is displayed on the fluorescent indicator tube and
the DVD ship mode is set.

This mode let you switch on or off power supply to the ZIVA during
tuner function.
When DVD power is set to off, the power supply to the ZIVA is cut
off during tuner function. It will increase the time taken to access
disc when function change from tuner to DVD but it will improve
tuner reception performance.
When DVD power is set to off, the power supply to the ZIVA is not
cut off during tuner function. It will reduce the time taken to access
disc when function change from tuner to DVD but it will decrease
tuner reception performance.
Procedure:

1. Press the

I

/1

button to turn the power on.

2. Press the [FUNCTION] button to select the “DVD”.
3. Press the

I

/1

button to turn the power off.

4. Press two buttons of

x

(DVD) and

I

/1

simultaneously. The

set will power on automatically.

5. The message “DVD POWER ON” or “DVD POWER OFF”

will be displayed on the fluorescent indicator tube.