Read Sony HCD-ZX10 / MHC-ZX10 Service Manual online
12
2-11. GEARS INSTALLATION
2-12. SLIDER (SELECTION) INSTALLATION
portion A
2
gear (chuking)
6
two screws
(PTPWH M2.6)
(PTPWH M2.6)
5
washer
3
convex portion of
slider (selection)
slider (selection)
4
compression spring
7
Insert the slider (selection)
into the portion A.
into the portion A.
1
rotary encoder
rotary encoder
Align with the slot of
rotary encoder.
rotary encoder.
align marking
gear (chuking)
Insert a convex portion into
a groove of gear (chuking).
a groove of gear (chuking).
1
Slide the slider (U/D)
fully in the arrow
direction.
fully in the arrow
direction.
3
gear (gear B)
2
gear (U/D slider)
4
gear (gear A)
Adjust the gear (gear B) with the
portion A as shown.
portion A as shown.
Adjust the gear so that it meshes with
the bottom tooth of slider (U/D)gear,
as shown.
the bottom tooth of slider (U/D)gear,
as shown.
portion A
slider (U/D) gear
linearly
gear
(gear B)
(gear B)
Adjust so as to be aligned with
gear (B) linearly,as shown.
gear (B) linearly,as shown.
Click on the first or last page to see other HCD-ZX10 / MHC-ZX10 service manuals if exist.