Read Sony HCD-XGV10AV / HCD-XGV6 / HCD-XGV8 / LBT-XGV10AV / LBT-XGV6 / LBT-XGV8 Service Manual online
2
HCD-XGV6/XGV8/XGV10AV
This appliance is classified as a CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT MARKING is located on the rear
exterior.
CLASS 1 LASER PRODUCT MARKING is located on the rear
exterior.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
other than those specified herein may result in hazardous radiation
exposure.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
Outputs
PHONES:
(stereo phone jack)
PHONES:
(stereo phone jack)
accepts headphones of 8 ohms or more
MD (VIDEO) OUT:
(phono jacks)
(phono jacks)
voltage 250 mV
impedance 1 kilohms
impedance 1 kilohms
LBT-XGV10AV
WOOFER OUT (phono jack):
voltage 1 V, impedance 1 kilohm
FRONT SPEAKER:
accepts impedance of 6 to 16 ohms
CENTER SPEAKER:
accepts impedance of 8 to 16 ohms
REAR SPEAKER:
accepts impedance of 8 to 16 ohms
LBT-XGV8
FRONT SPEAKER:
accepts impedance of 6 to 16 ohms
(SUPER WOOFER)
accepts impedance of 6 to 16 ohms
(TWEETER & WOOFER)
(SUPER WOOFER)
accepts impedance of 6 to 16 ohms
(TWEETER & WOOFER)
LBT-XGV6
FRONT SPEAKER:
accepts impedance of 6 to 16 ohms
Video section
Inputs
GAME INPUT (phono jack):
GAME INPUT (phono jack):
1 V p-p, 75 ohms
Outputs
VIDEO OUT (phono jack):
VIDEO OUT (phono jack):
1 V p-p, 75 ohms
VIDEO CD/CD player section
System
Compact disc and digital audio system
Laser
Semiconductor laser
(
(
λ
=795nm), Emission
duration: continuous
Frequency response
2 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
Video color system format
NTSC, PAL
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
using Sony TYPE I cassette
using Sony TYPE I cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(50 kHz step)
(50 kHz step)
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Middle Eastern model:
Middle Eastern model:
531 – 1,602 kHz
(with the interval set at 9 kHz)
(with the interval set at 9 kHz)
Other models:
531 – 1,602 kHz
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency
450 kHz
General
Power requirements
Saudi Arabian model:
Saudi Arabian model:
120 – 127 V, 220 V or 230 – 240 V AC,
50/60 Hz
Adjustable with voltage selector
50/60 Hz
Adjustable with voltage selector
Thai model:
220 V AC, 50/60 Hz
Other models:
120 V, 220 V or 230 –240 V AC,
50/60 Hz
Adjustable with voltage selector
50/60 Hz
Adjustable with voltage selector
Power consumption
LBT-XGV10AV
LBT-XGV10AV
230 watts
LBT-XGV8
320 watts
LBT-XGV6
180 watts
Dimensions (w/h/d)
Approx. 355 x 425 x 451 mm
Mass:
LBT-XGV10AV
LBT-XGV10AV
Approx. 15.4 kg
LBT-XGV8
Approx. 16.4 kg
LBT-XGV6
Approx. 14.7 kg
Supplied accessories:
AM loop antenna (1)
FM lead antenna (1)
Speaker cords (XGV6, XGV8 (4),
XGV10AV (5))
Speaker pads (XGV6, XGV8 (8),
XGV10AV (12))
Remote commander (1)
Batteries (2)
Video connecting cable (1)
FM lead antenna (1)
Speaker cords (XGV6, XGV8 (4),
XGV10AV (5))
Speaker pads (XGV6, XGV8 (8),
XGV10AV (12))
Remote commander (1)
Batteries (2)
Video connecting cable (1)
Design and specifications are subject to change witho fi notice.
Click on the first or last page to see other HCD-XGV10AV / HCD-XGV6 / HCD-XGV8 / LBT-XGV10AV / LBT-XGV6 / LBT-XGV8 service manuals if exist.