HCD-XGR90AV, LBT-XGR90AV - Sony Audio Service Manual (repair manual). Page 15

Read Sony HCD-XGR90AV / LBT-XGR90AV Service Manual online

15
HCD-XGR90AV
SECTION 4
TEST MODE
[MC Cold Reset]
• The cold reset clears all data including preset data stored in the
RAM to initial conditions. Execute this mode when returning
the set to the customer.
Procedure:
1. Turn the power ON or set to the DEMO mode.
2. Press three buttons of  c/CLOCK SET  ,  TUNER ENTER ,
and  \/1  simultaneously.
3. The set is reset, and displays “COLD RESET”, then becomes
DEMO mode.
[Change-over the AM Tuning Interval]
• The AM tuning interval can be changed over 9 kHz or 10 kHz.
Procedure:
1. Press the  \/1  button to turn the power ON.
2. Select the function “TUNER”, and press the TUNER/BAND
button to select the BAND “AM”.
3. Press the  \/1  button to turn the power OFF.
4. Press the  ENTER/NEXT   and  \/1  buttons simultaneously,
and the display on the fluorescent indicator tube changes to
“AM 9 K STEP” or “AM 10 K STEP”, and thus the tuning
interval is changed over.
[CD Ship Mode] (No memory clear)
• This mode moves the optical pick-up to the position durable to
vibration. Use this mode when returning the set to the customer
after repair.
Procedure:
1. Press the  \/1  button to turn the power ON.
2. Press the EDIT  and  \/1  buttons simultaneously.
3. A message “LOCK” is displayed on the fluorescent indicator
tube, and the CD delivery mode is set.
[LED and Fluorescent Indicator Tube All Lit, Key Check
Mode]
Procedure:
1. Press three buttons of  c/CLOCK SET  ,  ENTER/NEXT  ,
and  DISC 2   simultaneously.
2. LEDs and fluorescent indicator tube are all turned on.
3. Press the  DISC 1  button, the MODE and DESTINATION are
displayed fluorescent indicator tube.
4. Each time the  DISC 1  button is pressed, the MC/GC category
version is displayed in the following order.
5. Press the  DISC 2  button, and the key check mode is acti-vated.
6. In the key check mode, the fluorescent indicator tube displays
“K 0 J0 V0”. Each time a button is pressed, “K” value in-creases
to  “K69”call the button is pressed.However, once a button is
pressed, it is no longer taken into account.
“J” value increases like 1, 2, 3 ... if turn the . AMS >
JOG dial clock-wise,or it decreases like 0, 9, 8 ... if turn the
 . AMS >  JOG dial counter-clockwise.
“V” value increases like 1, 2, 3 ... if turn the  VOLUME   dial
clockwise (“+” direction), or it decreases like 0, 9, 8 ... if turn
the VOLUME dial counterclockwise (“–” direction).
7. To release from this mode, press three buttons in the same
manner as step 1, or disconnect the power cord.
NR
MC
GC
CD
CDDM
CDMA
CDMB
BDA
BDB
ST
TA
TM
TC
[Sled Servo Mode] (CD service mode)
• This mode can run the CD sled motor freely. Use this mode, for
instance, when cleaning the pick-up.
Procedure:
1. Select the function “CD”.
2. Press three buttons  c/CLOCK SET  ,  TUNER ENTER , and
 DISC 5  simultaneously.
3. The Sled Servo mode is selected, if “CD” is blanking on the
fluorescent indicator tube.
4. With the CD in stop status, press  M  button in CD section to
move the pick-up to outside track, or  m  button to inside track.
5. To exit from this mode, press  \/1  button turn to the power
OFF.
Note:
• Always move the pick-up to most inside track when exiting from
this mode. Otherwise, a disc will not be unloaded.
• Do not run the sled motor excessively, otherwise the gear can
be chipped.
[Change-over of FUNCTION Name]
• The FUNCTION name of external input terminal can be changed
over to VIDEO or MD. With the FUNCTION selected to “MD”,
about 5dB mute is applied to the input gain.
Procedure:
1. Press  \/1  button to turn the power OFF.
2. Press  \/1  button together with  FUNCTION  button for
several seconds, and the power is turned on, the display of
fluorescent indicator tube changes to “MD” or “VIDEO”
instantaneously, and thus the FUNCTION is changed over.
[Aging Mode]
This mode can be used for operation check of tape deck section.
Tape deck section work in parallel.
• If an error occurred:
The aging operation stops and display then status.
• If no error occurs:
The aging operation continues repeatedly.
Procedure:
1. Load the tapes into the decks A and B respectively.
2. Press the  FUNCTION   button to select the function “CD”.
3. Press the  PLAY MODE   button to set the “ALL DISCS” mode,
and press the  REPEAT   button to “REPEAT” off.
4. Press three buttons of   c/CLOCK SET  ,  TUNER ENTER  ,
and  DISC 4  simultaneously.
5. The aging mode is activated, if the indicator of disc tray num-
ber on the fluorescent indicator tube is blinking.
6. To release from the aging mode, press the  \/1  button to turn
the power OFF and operate the cold reset. (Refer to the “MC
Cold Reset”)
1. Display at the Aging Mode
• Display operating state of tape deck section alternately.
• If an error occurred, stop display.
Page of 78
Display

Click on the first or last page to see other HCD-XGR90AV / LBT-XGR90AV service manuals if exist.