Read Sony HCD-X1V Service Manual online
10
HCD-X1V
DVD MECHANISM DECK (CDM69EH) SERVICE POSITION
In checking the DVD mechanism deck (CDM69EH), prepare jig (extension cable J-2501-248-A: 1.00 mm Pitch, 27 cores, Length 300
mm).
PRECAUTION WHEN INSTALLING A NEW OPTICAL PICK-UP BLOCK/
PRECAUTION BEFORE UNSOLDERING THE STATIC ELECTRICITY
PREVENTION SOLDER BRIDGE
PRECAUTION BEFORE UNSOLDERING THE STATIC ELECTRICITY
PREVENTION SOLDER BRIDGE
DVD mechanism deck
(CDM69EH)
(CDM69EH)
MAIN board
(CN621)
(CN621)
wire (flat type) (27 core)
connect jig (extension cable J-2501-248-A)
to the MAIN board (CN621) and
wire (flat type) (27 core).
to the MAIN board (CN621) and
wire (flat type) (27 core).
flexible flat cable (24 core)
optical pick-up block
CAUTION
When installing a new Optical Pick-up block, be sure to connect
the flexible printed circuit board first of all before removing the static
electricity prevention solder bridge by unsoldering. Remove the static
electricity prevention solder bridge by unsoldering after the flexible
printed circuit board has already been connected.
(Do not remove nor unsolder the solder bridge as long as the Optical Pick-up block is kept
standalone.)
the flexible printed circuit board first of all before removing the static
electricity prevention solder bridge by unsoldering. Remove the static
electricity prevention solder bridge by unsoldering after the flexible
printed circuit board has already been connected.
(Do not remove nor unsolder the solder bridge as long as the Optical Pick-up block is kept
standalone.)
Click on the first or last page to see other HCD-X1V service manuals if exist.