Read Sony HCD-WZ7AV Service Manual online
6
HCD-WZ7AV
Perform the following procedures 1 to 7 to hook up your system using the supplied cords and
accessories. Middle Eastern model is used for illustration purpose.
accessories. Middle Eastern model is used for illustration purpose.
Preparation
Place the components as shown below.
1
Connect the system control cables to
the SYSTEM CONTROL connectors on
the tape deck.
the SYSTEM CONTROL connectors on
the tape deck.
Connect to the same numbered jack in the
order indicated on the rear panel.
order indicated on the rear panel.
Note
The system cable is used to send signals and electricity
between the components for interlinked operation.
Be sure to insert the connector horizontally until it
clicks into place. Otherwise the system will not operate
correctly.
between the components for interlinked operation.
Be sure to insert the connector horizontally until it
clicks into place. Otherwise the system will not operate
correctly.
2
Connect the speakers.
Connect the appropriate speaker cords from
the speaker terminals to the corresponding
SPEAKER terminals on the amplifier.
the speaker terminals to the corresponding
SPEAKER terminals on the amplifier.
Getting Started
Hooking up the system
AM loop antenna
FM lead antenna
CD player/Tuner
Amplifier/Tape deck
To front speaker (right)
To front speaker
(left)
(left)
To surround speaker (right)
To surround speaker (left)
To center speaker
Amplifier/
Tape deck
Tape deck
CD player/
Tuner
Tuner
Click on the first or last page to see other HCD-WZ7AV service manuals if exist.