HCD-SHAKE33, HCD-SHAKE44, HCD-SHAKE55, HCD-SHAKE66, HCD-SHAKE77, HCD-SHAKE88 - Sony Audio Service Manual (repair manual). Page 126

Change P/N of CN1001 and CN1003 in 4CH DAMP board (SHAKE33/SHAKE44).

Change P/N of CN451 in MOTHERBOARD board.

Change P/N of CN501 and CN502 in MOTHERBOARD board (Service code changed).

Change P/N of CN901 in MOTHERBOARD board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of CN5000 in VIDEO board (SHAKE44/SHAKE66/SHAKE88).

Change P/N of Ref. No. #1 and #2 in page 88, 89, 90, 91, 92 and 93.

Change P/N of REGULATOR, SWITCHING (SSNBPR) (SHAKE55/SHAKE66) in page 93 and 124.

Change P/N and description of Ref. No. 254 (SHAKE44: MY/SHAKE88: MY) in page 93 and 124.

Change P/N and description of C023 in MOTHERBOARD board (EXCEPT SHAKE33).

Change P/N and description of CN101 and CN301 in MOTHERBOARD board.

Change P/N and description of CN3000 in TUNER board.

Delete C905 in MOTHERBOARD board (SHAKE33/SHAKE55/SHAKE77).

1.4

2014.12

Add CLAMP, SLEEVE FERRITE illustration in page 90 (SHAKE33/SHAKE44).

Add STOPPER, WIRING illustration in page 90.

Change CLAMP to STOPPER, WIRING on REGULATOR, SWITCHING in page 15 and 93.

Change of 4CH DAMP Board (Suffi x 22).

Change sentence for CLASS 1 LASER product in page 4.

Change P/N of Ref. No. 152 (SHAKE44) in page 91.

Change P/N of Ref. No. 258 (SHAKE33/SHAKE44) in page 93 and 124.

Change P/N of IC105 in MOTHERBOARD board.

Delete CLAMP in page 90.

How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use 
the PDF fi le search function to fi nd one.

e.g.) If a contact point is shown as 

, follow the procedure below.

Procedure:
1.  Press the [F] key while pressing the [Ctrl] key.
2.  Input “>001Z” in the search box and press the [Enter] key.
3.  The relevant part (page), where the contact point is shown, appears.

Note:  If you still see the original page, press the [Enter] key again.