Read Sony HCD-S30IP Service Manual online
HCD-S30iP
HCD-S30iP
15
15
2. Flow When “OVER CURRENT” is Displayed
“OVER CURRENT” is
displayed on the VFD.
displayed on the VFD.
Disconnect the USB board and check if the
display persists.
display persists.
Exchange the MAIN board.
OK
NG
Exchange the USB board.
3. Flow When “PROTECT” is Displayed
“PROTECT” is
displayed on the VFD.
displayed on the VFD.
Check the if the voltage at pin 1 of CON2 on
the POWER board is +12V.
the POWER board is +12V.
Exchange the MAIN board.
OK
NG
Exchange the POWER board.
4. Flow When “LOCKED” is Displayed
“LOCKED” is displayed
on the VFD when
[
on the VFD when
[
Z] button is pressed.
Hold down [
x] button of remote commander and
[
Z] button of main unit for 5 seconds.
And the check if “UNLOCKED” is displayed on the
VFD.
VFD.
NG
Exchange the POWER board.
Click on the first or last page to see other HCD-S30IP service manuals if exist.