HCD-RX33 - Sony Audio Service Manual (repair manual)

hcd-rx33 service manual
Model
HCD-RX33
Pages
40
Size
807.86 KB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-rx33.pdf
Date

Read Sony HCD-RX33 Service Manual online

HCD-RX33
AEP Model
UK Model
SERVICE MANUAL
MINI Hi-Fi COMPONENT SYSTEM
MICROFILM
HCD-RX33 is the tuner, deck, CD and
amplifier section in MHC-RX33.
— Continued on next page —
SPECIFICATIONS
Model Name Using Similar Mechanism
HCD-G101
CD Mechanism Type
CX3
Base Unit Type
KSM-213BCM
Optical Pick-up Type
KSS-213B/S-N
Model Name Using Similar Mechanism
HCD-G101
DECK-A
TK20FX-SW943-800
DECK-B
TK20FX-SW943-800
CD
SECTION
TAPE
DECK
SECTION
Tape Transport
Mechanism Type
The following measured at AC 230 V 50 Hz;
DIN power output (Rated) 25 W + 25 W (6 
 at 1 kHz, DIN)
Continuous RMS power output (Reference)
35 W + 35W (6 
 at 1 kHz, 10% THD)
Outputs
PHONES (stereo phone jack) :
accepts headphones of 8 
 or more
SPEAKER :
accepts impedance of 6 to 16 
CD player section
System
Compact disc and digital audio system
Laser
Semiconductor laser (
λ
 = 780 nm)
Emission duration: continuous
Laser output
Max. 44.6 µW*
*This output is the value measured at a distance
of 200 mm from the objective lens surface on the
Optical Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz (± 0.5 dB)
Wavelength
780 – 790 nm
Tape deck section
Recording system
4 -track 2 -channel stereo
Frequency response
60 – 13,000 Hz (± 3dB), using Sony
TYPE 
Ι
 cassette
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
Antenna
FM lead antenna
Antenna terminal
75 
 unbalanced
Intermediate frequency
10.7MHz
AM tuner section
Tuning range
531 – 1,602 kHz
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency
450 kHz
— 2 —
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
 damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperatur e of soldering iron around 270˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
 circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
 or unsoldering.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
This appliance is classified as
a CLASS 1 LASER product.
The CLASS 1 LASER
PRODUCT MARKING is
located on the rear exterior.
This caution
label is located
inside the unit.
SERVICING NOTE
NOTES ON HANDLING THE OPTICAL PICK-UP BLOCK
OR BASE UNIT
The laser diode in the optical pick-up block may suffer electrostatic
break-down because of the potential difference generated by the
charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused on
the disc reflective surface by the objective lens in the optical pick-
up block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 
!
 OR DOTTED LINE WITH
MARK 
!
 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS
PUBLISHED BY SONY.
General
Power requirements
230V AC, 50/60Hz
Power consumption
80 W
Dimensions (w/h/d) incl. projecting parts and controls
Approx. 280 
×
 320 
×
 371 mm
(11 
1
/
8
 
×
 12 
5
/
8
 
×
 14 
5
/
8
 in)
Mass
Approx. 7.2 kg (15 lb 14 oz.)
Supplied accessories:
AM loop antenna (1)
Remote RM-SG5 (1)
FM lead antenna (1)
Design  and specifications are subject to change without notice.
— 3 —
TABLE OF CONTENTS
1. GENERAL
.......................................................................... 4
2. DISASSEMBLY
2-1.
CD Door ............................................................................. 5
2-2.
CD Mechanism Deck ......................................................... 5
2-3.
Front Panel ......................................................................... 6
2-4.
Main Board and H.P Board ................................................ 6
2-5.
CD Tray .............................................................................. 7
2-6.
CD Decoder Board ............................................................. 7
2-7.
Base Unit ............................................................................ 8
2-8.
Cassette Lid (L)/(R) ............................................................ 8
3. MECHANICAL ADJUSTMENTS
............................... 9
4. ELECTRICAL ADJUSTMENTS
................................. 9
5. DIAGRAMS
5-1.
Circuit Boards Location ................................................... 14
5-2.
Block Diagrams
• Deck Section ................................................................... 15
• Tuner/CD Section ............................................................ 17
5-3.
IC Block Diagrams ........................................................... 19
5-4.
Schematic Diagram —Main Section — ........................... 24
5-5.
Printed Wiring Board — Main Section — ....................... 29
5-6.
Printed Wiring Board —CD Section — ........................... 34
5-7.
Schematic Diagram —CD Section — .............................. 39
5-8.
Schematic Diagram — Panel Section — ......................... 43
5-9.
Printed Wiring Board —Panel Section — ........................ 47
5-10. IC Pin Function ................................................................ 52
6. EXPLODED VIEWS
6-1.
Cabinet Section................................................................. 54
6-2.
Front Panel Section .......................................................... 55
6-3.
Cassette Button Section .................................................... 56
6-4.
Cassette Mechanism Deck Section................................... 57
6-5.
CD Mechanism Deck Section 1 ....................................... 58
6-6.
CD Mechanism Deck Section 2 ....................................... 59
6-7.
Base Unit Section (KSM-213BCM)................................. 60
7. ELECTRICAL PARTS LIST
........................................ 61
— 4 —
SECTION 1
GENERAL
LOCATION OF PARTS AND CONTROLS
1
Disc tray
2
DISC 1 button
3
DISC 2 button
4
DISC 3 button
5
DISC SKIP button
6
§
 OPEN/CLOSE button
7
DBFB button
8
VOLUME knob
9
Display window
CLOCK TIMER SET button
TIMER ON/OFF button
!™
DISPLAY DEMO
TUNER/BAND
·
 
 (play/pause) button
!∞
ENTER/NEXT button
 
±
 CD AMS/TUNER PRESET TIMER
SET buttons
FILE SELECT
!•
I/
u
 (POWER) button
TUNER MEMORY REPEAT button
EDIT button
STEREO/M NO, PLAY MODE button
@™
TAPE button
π
 (STOP) button
0
 
)
 CD/TUNER button
@∞
PHONES jack
Deck A, PLAY/REC
Deck B, PLAY
@•
Tape operaying buttons
r
(recording)
(
(play)
0
(fast rewind)
)
(fast forward)
p
 
6
(stop/eject)
P
(pause)
7
1
2
3
4
5
6
9
!∞
8
!™
!•
@™
@∞
@•
Page of 40
Display

Download Sony HCD-RX33 Service Manual (Repair Manual)

Here you can read online and download Sony HCD-RX33 Service Manual in PDF. HCD-RX33 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony HCD-RX33 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.