Read Sony HCD-RV222D / HCD-RV333D / HCD-RV555D / MHC-RV222D / MHC-RV222DL / MHC-RV333D / MHC-RV333DL / MHC-RV555D Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
HCD-RV222D/RV222DL/RV333D/
RV333DL/RV555D
SPECIFICATIONS
DVD DECK RECEIVER
9-889-516-04
2011A04-1
©
2011.01
E Model
HCD-RV222D/RV333D/RV555D
Russian Model
HCD-RV222D/RV222DL/RV333D/RV333DL
Ver. 1.3 2011.01
• HCD-RV222D/RV222DL/RV333D/RV333DL/
RV555D are the tuner, deck, DVD and amplifi er
RV555D are the tuner, deck, DVD and amplifi er
section in MHC-RV222D/RV222DL/RV333D/
RV333DL/RV555D.
DVD
Section
Section
Model Name Using Similar Mechanism
New
DVD Mechanism Type
CDM74HFV-DVBU101
Optical Pick-up Name
KHM-313CAB
Tape Deck
Section
Section
Model Name Using Similar Mechanism
New
Tape Transport Mechanism Type
CWP42FF603
Photo: HCD-RV555D
Amplifi er section
The following measured at AC 230 V,
50/60 Hz (Russian model)
The following measured at AC 240 V,
50/60 Hz (South African model)
The following measured at AC 127, 240 V,
50/60 Hz (Saudi Arabian model)
The following measured at AC 120, 220,
240 V, 50/60 Hz (Other models)
The following measured at AC 230 V,
50/60 Hz (Russian model)
The following measured at AC 240 V,
50/60 Hz (South African model)
The following measured at AC 127, 240 V,
50/60 Hz (Saudi Arabian model)
The following measured at AC 120, 220,
240 V, 50/60 Hz (Other models)
MHC-RV555D (models with Karaoke
function only)
Power output (rated):
function only)
Power output (rated):
85 W + 85 W (6
Ω at 1 kHz, 1% THD,
at LINK MODE)
RMS output power (reference)
Front speaker:
130 W + 130 W (per channel at 8
Ω,
1 kHz, 10% THD)
Satellite speaker:
50 W + 50 W (per channel at 24
Ω,
1 kHz, 10% THD)
MHC-RV555D (models without
Karaoke function only)
Power output (rated):
Karaoke function only)
Power output (rated):
105 W + 105 W (6
Ω at 1 kHz, 1%
THD, at LINK MODE)
RMS output power (reference)
Front speaker:
150 W + 150 W (per channel at 8
Ω,
1 kHz, 10% THD)
Satellite speaker:
60 W + 60 W (per channel at 24
Ω,
1 kHz, 10% THD)
MHC-RV333D/RV333DL
(Russian and African models only)
Power output (rated):
(Russian and African models only)
Power output (rated):
70 W + 70 W (6
Ω at 1 kHz, 1%
THD)
RMS output power (reference)
RMS output power (reference)
Front speaker:
120 W + 120 W (per channel at 6
Ω,
1 kHz, 10% THD)
Subwoofer:
120 W (at 6
Ω, 80 Hz, 10% THD)
MHC-RV333D (Saudi Arabian and
South African models only)
Power output (rated):
South African models only)
Power output (rated):
55 W + 55 W (6
Ω at 1 kHz, 1%
THD)
RMS output power (reference)
RMS output power (reference)
Front speaker:
100 W + 100 W (per channel at 6
Ω,
1 kHz, 10% THD)
Subwoofer:
100 W (at 6
Ω, 80 Hz, 10% THD)
MHC-RV222D/RV222DL
Power output (rated):
Power output (rated):
65 W + 65 W (6
Ω at 1 kHz, 1%
THD)
RMS output power (reference):
RMS output power (reference):
120 W+ 120 W (per channel at 6
Ω,
1 kHz, 10% THD)
– Continued on next page –
HCD-RV222D/RV222DL/RV333D/RV333DL/RV555D
2
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
Inputs
VIDEO INPUT VIDEO (phono jack):
VIDEO INPUT VIDEO (phono jack):
1 Vp-p, 75 ohms
VIDEO (SAT) INPUT AUDIO L/R (phono
jacks):
jacks):
voltage 250 (450) mV, impedance
47 kilohms
MIC (phone jacks) (EA, PH, RU, SAF, SP
model only):
model only):
sensitivity 2 mV, impedance
10 kilohms
Outputs
VIDEO OUT (phono jack):
VIDEO OUT (phono jack):
max. output level 1 Vp-p, unbalanced,
Sync negative, load impedance
75 ohms
DVD DIGITAL OUT (Square optical
connector jack, rear panel):
connector jack, rear panel):
Wavelength 650 nm
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
FRONT SPEAKER:
MHC-RV555D:
FRONT SPEAKER:
MHC-RV555D:
Use only the supplied speaker SS-RV555D.
MHC-RV333D/RV333DL:
Use only the supplied speaker SS-RV222D.
MHC-RV222D/RV222DL:
Use only the supplied speaker SS-RV222D.
SATELLITE SPEAKER (MHC-RV555D only):
Use only the supplied speaker SS-RSX555D.
SUBWOOFER (MHC-RV333D/RV333DL only):
Use only the supplied subwoofer
SS-WG333D.
Disc player section
System:
System:
Compact disc and digital audio and
video system
Laser Diode Properties
Emission duration: Continuous
Laser Output*: Less than 44.6
μW
* This output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response
DVD (PCM 48 kHz): 2 Hz
‒ 22 kHz
(
±1 dB)
CD: 2 Hz
‒ 20 kHz (±0.5 dB)
Video color system format
Russian model: PAL
Other models: NTSC and PAL
Tape deck section
Recording system:
Recording system:
4-track 2-channel, stereo
Tuner section
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM stereo, FM/AM superheterodyne tuner
Antenna:
FM lead antenna
AM loop antenna
FM tuner section:
Tuning range:
87.5
Tuning range:
87.5
‒ 108.0 MHz (50 kHz step)
Intermediate frequency: 225 kHz
AM tuner section:
Tuning range:
Tuning range:
Russian and Saudi Arabian models:
531
‒ 1,602 kHz (9 kHz step)
Other models:
531
‒ 1,602 kHz (9 kHz)
530
‒ 1,610 kHz (10 kHz)
Intermediate frequency: 53 kHz
General
Power requirements
Power requirements
Russian model:
AC 230 V, 50/60 Hz
South African model:
AC 220
‒ 240 V, 50/60 Hz
Saudi Arabian model:
AC 120
‒ 127, 220 ‒ 240 V,
50/60 Hz, adjustable with voltage selector
Other models:
AC 120, 220, 230
‒ 240 V, 50/60 Hz,
adjustable with voltage selector
Power consumption
MHC-RV555D (models with Karaoke
function only): 185 W
MHC-RV555D (models without Karaoke
function only): 215 W
MHC-RV333D/RV333DL (Russian model only):
200 W (0.5 W at the Power Saving Mode)
MHC-RV333D (African model only):
210 W
MHC-RV333D (South African model
only): 175 W
MHC-RV333D (Saudi Arabian model
only): 180 W
MHC-RV222D/RV222DL: 160 W
(Russian model: 0.5 W at the Power
Saving Mode)
Dimensions (w/h/d) (excl. speakers)
Approx. 280
× 325 × 375 mm
Mass (excl. speakers)
MHC-RV555D: Approx. 9.8 kg
MHC-RV333D/RV333DL: Approx. 9.3 kg
MHC-RV222D/RV222DL: Approx. 8.5 kg
Design and specifi cations are subject to
change without notice.
change without notice.
• Abbreviation
EA
EA
: Saudi Arabia model
PH
: Philippines model
RU
: Russian model
SAF
: South African model
SP
: Singapore model
Ver. 1.3
HCD-RV222D/RV222DL/RV333D/RV333DL/RV555D
3
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
• Unleaded solder melts at a temperature about 40 °C higher
• Unleaded solder melts at a temperature about 40 °C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
about 350 °C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscous (sticky, less prone to fl ow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
also be added to ordinary solder.
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
•
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated by
the charged electrostatic load, etc. on clothing and the human body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The fl exible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc refl ective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
The laser beam on this model is concentrated so as to be focused
on the disc refl ective surface by the objective lens in the optical
pickup block. Therefore, when checking the laser diode emission,
observe from more than 30 cm away from the objective lens.
Laser component in this product is capable of emitting radiation
exceeding the limit for Class 1.
exceeding the limit for Class 1.
This appliance is classifi ed as
a CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
a CLASS 1 LASER product.
This marking is located on the
rear or bottom exterior.
HCD-RV222D/RV222DL/RV333D/RV333DL/RV555D
4
MODEL IDENTIFICATION
– Back Panel or Model Number Label –
– Back Panel or Model Number Label –
• Abbreviation
E3
E3
: 240V AC area in E model
E4
: 220 – 240V AC area in E model
E15
: Iranian model
EA
: Saudi Arabia model
PH
: Philippines model
RU
: Russian model
SAF : South African model
SP
SP
: Singapore model
Model
Part No.
RV222D: E3, E15 model
4-128-091-0[]
RV222D: E4 model
4-128-091-1[]
RV222D: PH model
4-128-091-2[]
RV222D: SP model
4-128-091-3[]
RV222D: RU model
4-128-091-5[]
RV222D: EA model
4-128-091-6[]
RV555D: E3, E15 model
4-131-194-0[]
RV555D: E4 model
4-131-194-1[]
RV555D: SP model
4-131-194-2[]
RV333D: SAF model
4-131-195-0[]
RV333D: RU model
4-131-195-1[]
RV333D: EA model
4-131-195-2[]
RV333D: E4 model
4-131-195-3[]
RV222DL: RU model
4-278-386-0[]
RV333DL: RU model
4-278-387-0[]
Parts No.
Ver. 1.3