Read Sony HCD-RV2 / HCD-RV5 / HCD-RV6 Service Manual online
8
HCD-RV2/RV5/RV6
TUNER SECTION
FM Tuned Level Adjustment
Procedure:
1. Supply a 25 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Adjust RV101 to the point (moment) when the TUNED indica-
1. Supply a 25 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Adjust RV101 to the point (moment) when the TUNED indica-
tor will change from going off to going on.
Adjustment Location: MAIN board
Null Adjustment
Procedure:
1. Supply a 60 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Measure voltage between pin 22 (AFC) and pin 3 (REG) of IC
1. Supply a 60 dB 98 MHz signal from the ANTENNA terminal.
2. Tune the set to 98 MHz.
3. Measure voltage between pin 22 (AFC) and pin 3 (REG) of IC
101. Adjust T101 ubtil the voltage becomes 0 V.
Adjustment Location: MAIN board
Adjustment Location
FM RF SSG
75
Ω
coaxial
Carrier frequency : 98 MHz
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 25 dB (at 75
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 25 dB (at 75
Ω
open)
FM ANTENNA terminal
(JK101)
(JK101)
set
FM RF SSG
75
Ω
coaxial
Carrier frequency : 98 MHz
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 60 dB (at 75
Modulation : AUDIO 1 kHz, 75 kHz
deviation (100%)
Output level : 60 dB (at 75
Ω
open)
FM ANTENNA terminal
(JK101)
(JK101)
set
IC201
IC101
T101
NULL adjustment
NULL adjustment
RV101
FM TUNED LEVEL adjustment
FM TUNED LEVEL adjustment
12
1
1
40
31
30
21
20
11 10
24
13
JK101
- MAIN BOARD (component side)-
Click on the first or last page to see other HCD-RV2 / HCD-RV5 / HCD-RV6 service manuals if exist.