HCD-RG66, MHC-RG66 - Sony Audio Service Manual (repair manual). Page 15

15

• The version or destination is displayed.

Procedure:
1. Press the  ?/1  button to turn the set ON.
2. To enter the test mode, press the three buttons  x ,  GAME EQ

and  MOVIE EQ  simultaneously.

3. The destination is displayed.
4. Press the  x  and  ENTER  buttons simultaneously.
5. The version is displayed.
6. To exit from this mode, press the  ?/1  button to turn the set

OFF.

• This mode can run the CD sled motor freely. Use this mode, for

instance, when cleaning the pick-up.

Procedure:
1. Press the ?/1 button to turn the set ON.
2. Select the function “CD”.
3. To enter the test mode, press three buttons x ,  GAME EQ ,

and  OPEN/CLOSE  simultaneously.

4. The message “CD S” is displayed. The CD service mode is

selected.

5. With the CD in stop status, press the  

M

 +

 

 button  to move the

pick-up to outside track and “CD S -F” is displayed, or press
the  – 

m 

 button to inside track and “CD S -R” is displayed.

6. To exit from this mode, perform as follows:

1) Move the pick-up to the most inside track.
2) Perform Cold Reset.

 • Always move the pick-up to most inside track when exiting from

this mode.  Otherwise, a disc will not be unloaded.

• Do not run the sled motor excessively, otherwise the gear can be

chipped.

• This mode is used to test the function of the equalizer.

Procedure:
1. Press the  ?/1  button to turn the set ON.
2. To enter the test mode, press the three buttons  x  ,  GAME EQ

and  DISC 3  simultaneously.

3. Press the  MOVIE EQ  button.

The function of the equalizer is set to “GEQ MIN”.

4. Press the  MUSIC EQ  button.

The function of the equalizer is set to “GEQ MAX”.

5. Press the  P FILE  button.

The function of the equalizer is set to “GEQ FLAT”.

6. To exit from this mode, press the  ?/1  button to turn the set

OFF.

• This mode moves the pick-up to the position durable to vibra-

tion. Use this mode when returning the set to the customer after
repair.

Procedure:
1. Press the ?/1 button to turn the set ON.
2. Select the function “CD”.
3. Press the  ?/1  button to turn the set OFF.
4. Press the  CD  button and  ?/1   button simultaneously.
5. The "STANDBY" display blinks instantaneously, then “LOCK”

is displayed and the CD ship mode is set.