Read Sony HCD-PZ1D / MHC-PZ1D Service Manual online
HCD-PZ1D
5
VIDEO SIGNAL CONFIRMATION METHOD
This unit can display the video of the connected cyber shot on the
LCD module.
Execute the method of the following when the defective video sig-
nal unit is brought in, and judge whether the main unit or Party-
shot & cyber shot is defective.
This unit can display the video of the connected cyber shot on the
LCD module.
Execute the method of the following when the defective video sig-
nal unit is brought in, and judge whether the main unit or Party-
shot & cyber shot is defective.
Procedure:
1. Prepare the jig (Part No. 1-771-264-11).
1. Prepare the jig (Part No. 1-771-264-11).
pin 3
(VIDEO GND)
(VIDEO GND)
Note:
Connect pin 2 between
pin 3 with the lead wire.
Connect pin 2 between
pin 3 with the lead wire.
pin 2
(GND)
(GND)
pin 4
(VIDEO SIGNAL)
(VIDEO SIGNAL)
pin 1
(POWER SUPPLY)
+4.2 V ± 0.15 V
(POWER SUPPLY)
+4.2 V ± 0.15 V
jig
2. Turn LOCK RING in the direction of [PLUG IN].
LOCK RING
POWER PLUG
3. Attach the jig with the POWER PLUG.
JIG
4. Keep pushing the SHUTTER (A) on, and turn LOCK RING in
the direction of [LOCK].
SHUTTER (A)
LOCK RING
5. Press the [Party-shot SYNC] button.
6. Confi rm the voltage between pin 1 (POWER SUPPLY) and
pin 2 (GND) of jig is a standard value.
Standard
value:
[Party-shot SYNC] indicator lighting : +4.2 V ± 0.15 V
[Party-shot SYNC] indicator blinking : +4.8 V ± 0.15 V
When [Party-shot SYNC] indicator is turned off : 0 V
7. Input the video signal (composite video out signal from DVD
player etc.) between pin 3 (VIDEO GND) and pin 4 (VID-
EO SIGNAL), and confi rm the video is displayed on the LCD
module.
EO SIGNAL), and confi rm the video is displayed on the LCD
module.
Click on the first or last page to see other HCD-PZ1D / MHC-PZ1D service manuals if exist.