Read Sony HCD-M500AV / MHC-M500AV Service Manual online
17
2. The tape A is played back in the FWD mode. After two minutes
of the FWD playback, the aging mode advances to the next
step.
The message: TAPE A AG-2 appears.
step.
The message: TAPE A AG-2 appears.
3. The tape A runs in fast forward. After two minutes of fast
forward, or at the shut-off point, the tape is stopped and the
aging mode advances to the next step.
The message: TAPE A AG-3 appears.
aging mode advances to the next step.
The message: TAPE A AG-3 appears.
4. The tape A is played back in the RVS mode. After two minutes
of the RVS playback, the aging mode advances to the next step.
The message: TAPE A AG-4 appears.
The message: TAPE A AG-4 appears.
5. The tape A is rewound and stops at the shut-off. The aging
mode advances to the next step.
The message: TAPE A AG-5 appears.
The message: TAPE A AG-5 appears.
6. The tape B is played back in the FWD mode. After two minutes
of the FWD playback, the aging mode advances to the next
step.
The message: TAPE B AG-2 appears.
step.
The message: TAPE B AG-2 appears.
7. The tape B runs in fast forward. After two minutes of fast
forward, or at the shut-off point, the tape is stopped and the
aging mode advances to the next step.
The message: TAPE B AG-3 appears.
aging mode advances to the next step.
The message: TAPE B AG-3 appears.
8. The tape B is played back in the RVS mode. After two minutes
of the RVS playback, the aging mode advances to the next step.
The message: TAPE B AG-4 appears.
The message: TAPE B AG-4 appears.
9. The tape B is rewound and stops at the shut-off. The aging
mode advances to the next step.
The message: TAPE B AG-5 appears.
The message: TAPE B AG-5 appears.
[AM TUNER STEP 9 kHz/10 kHz Selection Mode]
*
*
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
channel step.
Procedure:
1. Turn on the power and select TUNER using the FUNCTION
1. Turn on the power and select TUNER using the FUNCTION
button.
2. Select AM with the TUNER/BAND button and turn off the
power.
3. Press the two buttons ENTER and @/1 at the same time. The
main power is turned on and the other frequency step of the
previous mode is selected and displayed. “AM 9 k STEP” or
“AM 10 k STEP”
previous mode is selected and displayed. “AM 9 k STEP” or
“AM 10 k STEP”
[CD SRAM Test Mode]
Procedure:
1. Turn on the power and select CD using the FUNCTION button.
2. Press the three buttons x , ENTER and DBFB at the same
1. Turn on the power and select CD using the FUNCTION button.
2. Press the three buttons x , ENTER and DBFB at the same
time.
3. The message “SRAM OK” appears on the fluorescent indicator
tube.
[GC VACS ON/OFF Mode]
Procedure:
1. Press the two buttons DELETE and @/1 at the same time.
2. The message “VACS ON” or “VACS OFF” appears on the
1. Press the two buttons DELETE and @/1 at the same time.
2. The message “VACS ON” or “VACS OFF” appears on the
fluorescent indicator tube.
Click on the first or last page to see other HCD-M500AV / MHC-M500AV service manuals if exist.