HCD-LV80, LBT-LV80 - Sony Audio Service Manual (repair manual). Page 7

7

• CD
1. The tray rotates.
2. DISC 1 is chucked.
3. The TOC is read.
4. The first track is played for 2 seconds.
5. The last track is played for 2 seconds.
6. The tray rotates.
7. DISC 4 is chucked.
8. The TOC is read.
9. The first track is played for 2 seconds.
10. The last track is played for 2 seconds.
11. Repeated from step 1.

• Display when ended abnormally
When the tape deck is abnormal:

The state when ended abnormally is displayed.
The contents of display are the same as that during aging.

A message indicating that errors such as “CD MEC ERR” have occurred.
Check the error contents in the following error history display mode.

Mode which enables the history of error occurring in the CD player to be checked.
Execute this mode after ending the aging mode.

Procedure:
1. Press the  "/1  button to turn the set ON.
2. Press the three buttons   c/CLOCK SET  ,  ENTER  , and  CD SYNC  simultaneously.
3. A message such as “EMC@@EDC**” is displayed.

@@ : Number of mechanical errors (Up to three past errors)
**

: Number of errors (NO DISC ERROR) which occurs after chucking (Up to three past errors)

4. When checking the history of mechanical errors, press the  PLAY MODE  button. When checking errors after chucking, press the

REPEAT  button to switch the display.

5. Press the  "/1  button to end and turn the set OFF.
6. To erase the error history, perform COLD reset.

(Press the three buttons   c/CLOCK SET  ,  ENTER  , and  DISC 1  simultaneously.

• Viewing the mechanical error history display

(Switch the history by pressing the  PLAY MODE  button.)