HCD-LF10 - Sony Audio Service Manual (repair manual)

hcd-lf10 service manual
Model
HCD-LF10
Pages
106
Size
7.25 MB
Type
PDF
Document
Service Manual
Brand
Device
Audio
File
hcd-lf10.pdf
Date

Read Sony HCD-LF10 Service Manual online

SERVICE MANUAL
SUPER AUDIO CD/DVD PLAYER
US Model
E Model
Australian Model
HCD-LF10
Ver. 1.0  2005.03
SPECIFICATIONS
Super Audio CD/DVD system
Laser
Semiconductor laser
(Super Audio CD/DVD: 
λ 
= 650 nm)
(CD: 
λ = 780 nm)
Emission duration: 
continuous
Signal format system
North America:
NTSC
Other regions:
NTSC, PAL
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 
kHz (
±1.0 dB)
CD: 2 Hz to 20 kHz (
±
1.0 
dB)
Harmonic distortion
Less than 0.03 %
Dimensions (approx.)
568 
× 200 × 120 mm 
(22 
3
/
8
 
× 7 
7
/
8
 
× 4 
3
/
inches) (w/h/d) incl. 
projecting parts
Mass (approx.)
4.9 kg (10 lb 13 oz)
Design and specifications are subject to change 
without notice.
Model Name Using Similar Mechanism
NEW
DVD Mechanism Type
CDM80AT-DVBU29T
Optical Traverse Unit Name
DBU-3
9-879-564-01
2005C05-1
© 2005.03
Sony Corporation
Audio Group
Published by Sony Engineering Corporation
HCD-LF10 is the super audio CD/DVD player section
in DAV-LF10.
This system incorporates with Dolby* Digital 
and Dolby Pro Logic (II) adaptive matrix 
surround decoder and the DTS** Digital 
Surround System.
* Manufactured under license from Dolby 
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are 
trademarks of Dolby Laboratories.
** Manufactured under license from Digital Theater 
Systems, Inc.
“DTS”, “DTS-ES”, and “DTS Digital Surround” 
are trademarks of Digital Theater Systems, Inc.
2
HCD-LF10
Notes on chip component replacement
• Never reuse a disconnected chip component.
• Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
• Keep the temperature of the soldering iron around 270 ˚C
during repairing.
• Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
• Be careful not to apply force on the conductor when soldering
or unsoldering.
This appliance is 
classified as a CLASS 1 
LASER product. The 
label is located on the 
rear of the control unit.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK 
 0
  OR  DOTTED  LINE
WITH  MARK  
0
  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN
THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS  WHOSE
PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  MANUAL  OR
IN  SUPPLEMENTS  PUBLISHED  BY  SONY.
3
HCD-LF10
This System Can Play the 
Following Discs
Format of 
discs
Disc logo
DVD VIDEO
Super Audio 
CD
VIDEO CD
The “DVD VIDEO” logo is a trademark.
Note on PBC (Playback 
Control) (VIDEO CDs)
This system conforms to Ver. 1.1 and Ver. 2.0 of 
VIDEO CD standards. You can enjoy two kinds 
of playback depending on the disc type.
About Multi Session CD
• This system can play Multi Session CDs when 
an MP3 audio track is contained in the first 
session. Any subsequent MP3 audio tracks 
recorded in later sessions can also be played 
back.
• This system can play Multi Session CDs when 
a JPEG image file is contained in the first 
session. Any subsequent JPEG image files 
recorded in later sessions can also be played 
back. 
Audio CD
CD-R/CD-RW 
(audio data) 
(MP3 files) 
(JPEG files)
Disc type
You can
VIDEO CDs 
without PBC 
functions 
(Ver. 1.1 discs)
Enjoy video playback (moving 
pictures) as well as music.
VIDEO CDs 
with PBC 
functions 
(Ver. 2.0 discs)
Play interactive software using 
menu screens displayed on the 
TV screen (PBC Playback), in 
addition to the video playback 
functions of Ver. 1.1 discs. 
Moreover, you can play high-
resolution still pictures, if they 
are included on the disc.
Format of 
discs
Disc logo
• If audio tracks and images in music CD format 
or video CD format are recorded in the first 
session, only the first session will be played 
back.
Region code
Your system has a region code printed on the 
back of the unit and will only play DVDs labeled 
with the same region code.
DVDs labeled 
 will also play on this system.
If you try to play any other DVD, the message 
[Playback prohibited by area limitations.] will 
appear on the TV screen. Depending on the 
DVD, no region code indication may be given 
even though playing the DVD is prohibited by 
area restrictions.
Examples of discs that the 
system cannot play
The system cannot play the following discs:
• CD-ROMs (except for extension “.MP3,” 
“.JPG,” or “.JPEG”)
• CD-Rs/CD-RWs other than those recorded in 
the following formats:
− audio CD format
− video CD format
− MP3/JPEG format that conforms to 
ISO9660* Level 1/Level 2, or its extended 
format, Joliet
• Data part of CD-Extras

 
DVD Audio discs
DVD-RAMs
Progressive JPEG file
A logical format of files and folders on CD-ROMs, 
defined by ISO (International Organization for 
standardization)
Do not load the following discs: 
 
A DVD with a different region code.
 
A disc that is neither standard nor circular 
(e.g., card, heart, or star shape).
 
A disc with paper or stickers on it.
 
A disc that has adhesive or cellophane tape still 
left on it.
Notes about CD-R/CD-RW/
DVD-R/DVD-RW/DVD+R/
DVD+RW
In some cases, CD-R/CD-RW/DVD-R/DVD-
RW/DVD+R/DVD+RW cannot be played on 
this player due to the recording quality or 
physical condition of the disc, or the 
characteristics of the recording device and 
authoring software.
The disc will not play if it has not been correctly 
finalized. For more information, see the 
operating instructions for the recording device.
Note that discs created in the Packet Write 
format cannot be played.
M usic  d iscs  en co ded  w it h 
c opyrigh t   p rot ec t ion 
t e ch nol og ies
This product is designed to playback discs that 
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with 
copyright protection technologies are marketed 
by some record companies. Please be aware that 
among those discs, there are some that do not 
conform to the CD standard and may not be 
playable by this product.
Note on DualDiscs
This product is designed to playback discs that 
conform to the Compact Disc (CD) standard. A 
DualDisc is a two sided disc product which 
mates DVD recorded material on one side with 
digital audio material on the other side. Please 
be aware that the audio side of a DualDisc may 
not play on this product because these discs do 
not conform to the CD standard.
“DualDisc” is a trademark of the Recording 
Industry Association of America (RIAA).
Note on playback operations 
of DVDs and VIDEO CDs
Some playback operations of DVDs and VIDEO 
CDs may be intentionally set by software 
producers. Since this system plays DVDs and 
VIDEO CDs according to the disc contents the 
ALL
software producers designed, some playback 
features may not be available. Also, refer to the 
instructions supplied with the DVDs or VIDEO 
CDs.
DVD-ROMs


*

4
HCD-LF10
TABLE  OF  CONTENTS
1.
SERVICING  NOTES
...............................................
5
2.
GENERAL
...................................................................
9
3.
DISASSEMBLY
3-1.
Disassembly Flow ........................................................... 11
3-2.
Stand Section ................................................................... 12
3-3.
Cover (MAIN/CDM) ....................................................... 12
3-4.
Chassis Section ................................................................ 13
3-5.
D-LED Board .................................................................. 13
3-6.
STBY KEY Board, EJECT KEY Board ......................... 14
3-7.
Mechanism Deck (CDM80AT-DVBU29T) ..................... 14
3-8.
DMB07 Board ................................................................. 15
3-9.
DISPLAY Board .............................................................. 15
3-10. I/O Board ......................................................................... 16
3-11. DVD POWER Board ....................................................... 16
3-12. Chassis (Top) ................................................................... 17
3-13. Lever (Loading R/L) ........................................................ 18
3-14. Disc Stop Lever, Disc Sensor Lever ................................ 19
3-15. Driver Board, Motor (Pulley) Assy (Loading) (M701) ... 19
3-16. RF Board ......................................................................... 20
3-17. Optical Traverse Unit (DBU-3) ....................................... 20
3-18. Base Unit ......................................................................... 21
3-19. Lever (BU Lock) ............................................................. 21
3-20. Close Lever ...................................................................... 22
3-21. Dir Lever, Gear (IDL-B) .................................................. 22
3-22. Gear (IDL-C) ................................................................... 23
4.
TEST  MODE
.............................................................. 24
5.
ELECTRICAL  ADJUSTMENTS
......................... 33
6.
DIAGRAMS
6-1.
Block Diagram – RF SERVO Section – .......................... 35
6-2.
Block Diagram – VIDEO/MECHANISM Section – ....... 36
6-3.
Block Diagram – AUDIO Section – ................................ 37
6-4.
Block Diagram
– DISPLAY/POWER SUPPLY Section – ....................... 38
6-5.
Printed Wiring Board – RF Board – ................................ 40
6-6.
Schematic Diagram – RF Board – ................................... 41
6-7.
Printed Wiring Board – DMB07 Board (Side A) – ......... 42
6-8.
Printed Wiring Board – DMB07 Board (Side B) – ......... 43
6-9.
Schematic Diagram – DMB07 Board (1/10) – ................ 44
6-10. Schematic Diagram – DMB07 Board (2/10) – ................ 45
6-11. Schematic Diagram – DMB07 Board (3/10) – ................ 46
6-12. Schematic Diagram – DMB07 Board (4/10) – ................ 47
6-13. Schematic Diagram – DMB07 Board (5/10) – ................ 48
6-14. Schematic Diagram – DMB07 Board (6/10) – ................ 49
6-15. Schematic Diagram – DMB07 Board (7/10) – ................ 50
6-16. Schematic Diagram – DMB07 Board (8/10) – ................ 51
6-17. Schematic Diagram – DMB07 Board (9/10) – ................ 52
6-18. Schematic Diagram – DMB07 Board (10/10) – .............. 53
6-19. Printed Wiring Board – DRIVER Board – ...................... 54
6-20. Schematic Diagram – DRIVER Board – ......................... 54
6-21. Printed Wiring Boards
– DVD POWER/FAN CONTROL Boards – ................... 55
6-22. Schematic Diagram – DVD POWER Board (1/2) – ....... 56
6-23. Schematic Diagram
– DVD POWER (2/2)/FAN CONTROL Boards – .......... 57
6-24. Printed Wiring Board – I/O Board – ............................... 58
6-25. Schematic Diagram – I/O Board – .................................. 59
6-26. Printed Wiring Board – DISPLAY Board – .................... 60
6-27. Schematic Diagram – DISPLAY Board – ....................... 61
6-28. Printed Wiring Boards – KEY Section – ......................... 62
6-29. Schematic Diagram – KEY Section – ............................. 63
7.
EXPLODED  VIEWS
7-1.
Stand Section ................................................................... 87
7-2.
Panel Section ................................................................... 88
7-3.
Chassis Section ................................................................ 89
7-4.
Mechanism Deck Section-1 (CDM80AT-DVBU29T) .... 90
7-5.
Mechanism Deck Section-2 (CDM80AT-DVBU29T) .... 91
7-6.
Mechanism Deck Section-3 (CDM80AT-DVBU29T) .... 92
7-7.
Mechanism Deck Section-4 (CDM80AT-DVBU29T) .... 93
8.
ELECTRICAL  PARTS  LIST
................................ 94
Page of 106
Display

Download Sony HCD-LF10 Service Manual (Repair Manual)

Here you can read online and download Sony HCD-LF10 Service Manual in PDF. HCD-LF10 service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sony HCD-LF10 Audio. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.