HCD-IS10 - Sony Audio Service Manual (repair manual). Page 11

11

 Follow the disassembly procedure in the numerical order given.

1

four screws
(BVTP3 

×

 8)

2

cover (bottom) assy

sheet

Note:  Please spread a seat under a set 

not to injure panel (top) assy.

1

two screws
(BVTP3 

×

 8)

2

cover (chassis)

5

four insulator screws

9

insulator

9

three insulators

3

two claws

6

Lift up the
optical pick-up block.

8

Be sure to bridge here, and then disconnect the
wire (flat type) (24 core).
(optical pick-up block will be destroyed without bridging.)
On the contrary at the installation, connect the
wire (flat type) (24 core) first, and then remove the bridge.
Note: For a soldering iron, use the one with a ground wire.

PRECAUTION WHEN REMOVING GOOD OPTICAL PICK-UP BLOCK

4

Lift up the FFC holder.

7

connector

0

optical pick-up block
(KHM-313CAB)

Note:  A screw hole of this screw tends to be damaged, 

so please be careful about the installation time 
and the time of removal.