Read Sony HCD-GV10AV Service Manual online
69
HCD-GV10AV
•
PANEL FL BOARD IC601 TMP88CP76F-2C28 (FLUORESCENT INDICATOR TUBE DRIVER, KEY CONTROL)
Pin No.
Pin Name
I/O
Description
1
SIRCS
I
Remote control signal input from the remote control receiver (IC702)
2
KEY POWER
SAVE/DEMO
I
Power save/demonstration switch (S609 POWER SAVE/DEMO (STANDBY)) input terminal
“L” is input when key pressing
“L” is input when key pressing
3
LED SCK
O
Serial data transfer clock signal output to the LED driver (IC701)
4
KEY POWER
ON/OFF
I
Power on/off switch (S608 I/1) input terminal “L” is input when key pressing
5
LED DAT
O
Serial data output to the LED driver (IC701)
6
LED LATCH
O
Serial data latch pulse signal output to the LED driver (IC701)
7
LED SEL
O
LED selection signal output
8
WAKE UP
O
Wakeup control signal output to the system controller (IC501) “L” active
9
VOL A
I
Jog dial pulse input from the rotary encoder (S736 VOLUME) (A phase input)
10
VOL B
I
Jog dial pulse input from the rotary encoder (S736 VOLUME) (B phase input)
11
KEY 0
I
Key input terminal (A/D input) S601 to S607, S727 to S730, S733 to S735
(DISPLAY, SPECTRUM ANALYZER, TIMER SELECT, SLEEP, c/CLOCK SET, GAME,
FUNCTION, ROCK, MOVIE, REGGAE, KARAOKE PON/MPX, PRO LOGIC, DVD 5.1CH,
KEY CONTROL #) keys input
(DISPLAY, SPECTRUM ANALYZER, TIMER SELECT, SLEEP, c/CLOCK SET, GAME,
FUNCTION, ROCK, MOVIE, REGGAE, KARAOKE PON/MPX, PRO LOGIC, DVD 5.1CH,
KEY CONTROL #) keys input
12
KEY 1
I
Key input terminal (A/D input)
S621 to S627, S743 to S750 (H, h, x, . AMS > m/M, DOLBY NR, DIRECTION,
CD FLASH, EDIT, NON-STOP, DISC1/2/3/4/5) keys input
S621 to S627, S743 to S750 (H, h, x, . AMS > m/M, DOLBY NR, DIRECTION,
CD FLASH, EDIT, NON-STOP, DISC1/2/3/4/5) keys input
13
KEY 2
I
Key input terminal (A/D input)
S615 to S619, S716 to S726 (h, H, x, . AMS > m/M, POP, JAZZ, SAMBA,
DANCE, TANGO, SALSA, GAME, b, v, V, B) keys input
S615 to S619, S716 to S726 (h, H, x, . AMS > m/M, POP, JAZZ, SAMBA,
DANCE, TANGO, SALSA, GAME, b, v, V, B) keys input
14
KEY 3
I
Key input terminal (A/D input) S701 to S715, S741 (TUNER MEMORY, ENTER/TEXT, –,
TUNER/BAND, +, STEREO/MONO, TUNING MODE, ENTER, P.FILE, FLAT, KEY
CONTROL 2, DSP, GROOVE, SUPER WOOFER, SUPER WOOFER MODE, CD LOOP) keys
input
TUNER/BAND, +, STEREO/MONO, TUNING MODE, ENTER, P.FILE, FLAT, KEY
CONTROL 2, DSP, GROOVE, SUPER WOOFER, SUPER WOOFER MODE, CD LOOP) keys
input
15
KEY 4
I
Key input terminal (A/D input) S611 to S614, S751 to S762 (X, z REC, H SPEED DUB, CD
SYNC, HX, x, m, M, DISC SKIP, REPEAT, PLAY MODE, NEXT, PREV, RETURN,
SELECT, ACTIVE) keys input
SYNC, HX, x, m, M, DISC SKIP, REPEAT, PLAY MODE, NEXT, PREV, RETURN,
SELECT, ACTIVE) keys input
16
GUITAR
DISTORTION
O
Distortion on/off control signal output terminal Not used
17
BPF 0
I
Spectrum analyzer drive (super low frequency) signal input from the spectrum analyzer band-
pass filter (IC602) (for 40 Hz)
pass filter (IC602) (for 40 Hz)
18
BPF 1
I
Spectrum analyzer drive (low frequency) signal input from the spectrum analyzer band-pass filter
(IC602) (for 100 Hz)
(IC602) (for 100 Hz)
19
BPF 2
I
Spectrum analyzer drive (low and middle frequency) signal input from the spectrum analyzer
band-pass filter (IC602) (for 400 Hz)
band-pass filter (IC602) (for 400 Hz)
20
BPF 3
I
Spectrum analyzer drive (middle and high frequency) signal input from the spectrum analyzer
band-pass filter (IC602) (for 2 kHz)
band-pass filter (IC602) (for 2 kHz)
21
BPF 4
I
Spectrum analyzer drive (high frequency) signal input from the spectrum analyzer band-pass filter
(IC602) (for 6 kHz)
(IC602) (for 6 kHz)
22
ALL BAND
I
Spectrum analyzer drive signal input from the spectrum analyzer band-pass filter (IC602)
(for VACS, non-stop signal)
(for VACS, non-stop signal)
23
VSS
—
Ground terminal
24
VASS
—
Ground terminal (for A/D conversion)
25
VAREF
I
Reference voltage (+5V) input terminal (for A/D conversion)
26
VDD
—
Power supply terminal (+5V)
27, 28
GR-16, GR-15
O
Grid drive signal output to the fluorescent indicator tube (FL601)
29 to 40
GR-14 to GR-3
O
Grid drive signal output to the fluorescent indicator tube (FL601)
41
VDD VFT
—
Power supply terminal (+5V)
Click on the first or last page to see other HCD-GV10AV service manuals if exist.