Read Sony HCD-GTZ2 / HCD-GTZ2I / HCD-GTZ3 / HCD-GTZ3I / MHC-GTZ2 / MHC-GTZ2I / MHC-GTZ3 / MHC-GTZ3I Service Manual online
HCD-GTZ2/GTZ2i/GTZ3/GTZ3i
12
SECTION 4
ELECTRICAL CHECK
FM TUNE LEVEL CHECK
signal
generator
set
Procedure:
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
1. Turn on the set.
2. Input the following signal from signal generator to FM antenna
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation
: 75 kHz
Modulation
: 1 kHz
ANT input
: 35 dBu (EMF)
Note: Use 75 ohm coaxial cable to connect signal generator and the set.
You cannot use video cable for checking.
Use signal generator whose output impedance is 75 ohm.
3. Set to FM tuner function and tune A, B and C signals.
4. Confi rm “TUNED” is lit on the display for A, B and C signals.
When the selected station signal is received in good condition,
“TUNED” is displayed.
TUNER SECTION
Click on the first or last page to see other HCD-GTZ2 / HCD-GTZ2I / HCD-GTZ3 / HCD-GTZ3I / MHC-GTZ2 / MHC-GTZ2I / MHC-GTZ3 / MHC-GTZ3I service manuals if exist.