Read Sony HCD-GTR6 / HCD-GTR6B / HCD-GTR7 / HCD-GTR8 / HCD-GTR8B / MHC-GTR6 / MHC-GTR8 Service Manual online
2
HCD-GTR6/GTR6B/GTR7/GTR8/GTR8B
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. RE-
PLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. RE-
PLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
MHC-GTR6 (HCD-GTR6/HCD-GTR6B)
The following are measured at
AC 120, 220, 240 V, 50/60 Hz
Front/Surround speaker
Power Output (rated):
Power Output (rated):
200 W + 200 W (at 4
Ω, 1 kHz, 1% THD, at LINK MODE)
Front speaker
RMS output power (reference):
RMS output power (reference):
225 W + 225 W (per channel at 8
Ω, 1 kHz, 10% THD)
Surround speaker
RMS output power (reference):
RMS output power (reference):
225 W + 225 W (per channel at 8
Ω, 1 kHz, 10% THD)
Inputs
VIDEO (AUDIO IN) L/R:
VIDEO (AUDIO IN) L/R:
Voltage 250 mV, impedance 47 kilohms
PC IN L/R:
Voltage 700 mV, impedance 47 kilohms
MIC:
Sensitivity 1 mV, impedance 10 kilohms
(USB) port:
Type A
Outputs
PHONES:
PHONES:
Accepts headphones of 8
Ω or more
Disc player section
System
Compact disc and digital audio system
Laser Diode Properties Emission Duration: Continuous
Laser Output*: Less than 44.6 µW
* This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Frequency response
20 Hz – 20 kHz
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 88 dB
Tape deck section
(Except for Latin American and Mexican models)
Recording system
(Except for Latin American and Mexican models)
Recording system
4-track 2-channel stereo
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American models:
Tuning range
North American models:
87.5 – 108.0 MHz (100 kHz step)
Other models:
87.5 – 108.0 MHz (50 kHz step)
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency 10.7 MHz
AM tuner section
Tuning range
Tuning range
Pan-American and Oceanian models:
530 – 1,710 kHz (with the interval set at 10 kHz)
531 – 1,710 kHz (with the interval set at 9 kHz)
Other models:
530 – 1,610 kHz (with the interval set at 10 kHz)
531 – 1,602 kHz (with the interval set at 9 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency 450 kHz
USB section
Supported bit rate
Supported bit rate
MP3 (MPEG 1 Audio Layer 3): 32 – 320 kbps, VBR
WMA: 48 – 192 kbps AAC: 48 – 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer 3): 32/44.1/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Transfer speed
Full-Speed
Supported USB device Mass Storage Class
Maximum current
Maximum current
500 mA
General
Power requirements
Mexican model:
Power requirements
Mexican model:
127 V AC, 60 Hz
Australian model:
230 – 240 V AC, 50/60 Hz
Argentina model:
220 V AC, 50/60 Hz
Other models:
120 V, 220 V or 230 – 240 V AC, 50/60 Hz,
adjustable with voltage selector
Power consumption
MHC-GTR8: 460 W
MHC-GTR7: 440 W
MHC-GTR6: 300 W
Dimensions (w/h/d) (Approx.)
HCD-GTR8/HCD-GTR8B/
HCD-GTR7/
HCD-GTR6/HCD-GTR6B: 295x380x457mm
Mass (Approx.)
HCD-GTR8B: 16.5 kg
HCD-GTR8/HCD-GTR7: 15.8 kg
HCD-GTR6B: 14.5 kg
HCD-GTR6: 13.8 kg
Design and specifi cations are subject to change without notice.
• Standby power consumption: 0.5 W
• Halogenated fl ame retardants are not
used in the certain printed wiring boards.
• Halogenated fl ame retardants are not
used in the certain printed wiring boards.
Click on the first or last page to see other HCD-GTR6 / HCD-GTR6B / HCD-GTR7 / HCD-GTR8 / HCD-GTR8B / MHC-GTR6 / MHC-GTR8 service manuals if exist.