Read Sony HCD-GTR33 / HCD-GTR55 / HCD-GTR77 / MHC-GTR33 / MHC-GTR55 / MHC-GTR77 Service Manual online
HCD-GTR33/GTR55/GTR77
13
SECTION 4
MECHANICAL ADJUSTMENTS
(For African model only)
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened-
PRECAUTION
1. Clean the following parts with a denatured-alcohol-moistened-
swab :
record/playback head
pinch roller
erase head
rubber belts
capstan
idlers
2. Demagnetize the record/playback head with a head demag-
netizer. (Do not bring the head magnetizer close to the erase
head.)
head.)
3. Do not use a magnetized screwdriver for the adjustments.
4. After the adjustments, apply suitable locking compound to the
4. After the adjustments, apply suitable locking compound to the
parts adjusted.
5. The adjustments should be performed with the rated power
supply voltage unless otherwise noted.
• Torque
Measurement
Mode
Torque Meter
Meter Reading
FWD
CQ-102AS
2.0 – 8.0 mN • m
(20 to 80 g • cm)
(0.28 – 1.12 oz • inch)
FWD
Back Tension
Back Tension
CQ-102C
0.15 – 0.6 mN • m
(1.5 to 6 g • cm)
(0.021 – 0.083 oz • inch)
FF
CQ-201AS
5 – 17.7 mN • m
(50 to 177 g • cm)
(0.7 – 2.48 oz • inch)
REV
CQ-201B
5 – 17.7 mN • m
(50 to 177 g • cm)
(0.7 – 2.48 oz • inch)
•
Tape Tension Measurement
Mode
Tension Meter
Meter Reading
FWD
CQ-403A
more than 80 g
(more than 2.82 oz)
Click on the first or last page to see other HCD-GTR33 / HCD-GTR55 / HCD-GTR77 / MHC-GTR33 / MHC-GTR55 / MHC-GTR77 service manuals if exist.