HCD-GPX6, HCD-GPX7 - Sony Audio Service Manual (repair manual). Page 4

Read Sony HCD-GPX6 / HCD-GPX7 Service Manual online

4
HCD-GPX6/GPX7
 
– Rear View –
Power requirement 
indication
SECTION  1
SERVICING  NOTES
NOTES  ON  HANDLING  THE  OPTICAL  PICK-UP
BLOCK  OR  BASE  UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER  DIODE  AND  FOCUS  SEARCH  OPERATION
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
MODEL  IDENTIFICATION
SERVICE  POSITION
– TAPE MECHANISM DECK –
tape mechanism deck
MODEL
Power requirement indication
US model
AC: 120V 60Hz
AEP model
AC: 230V - 50/60Hz
Hong Kong, Singapore
AC: 120V/220V/230-240V
models
- 50/60Hz
Argentina model
AC: 220V - 50Hz
Korean model
AC: 220V - 60Hz
Australian model
AC: 230V-240V - 50/60Hz
Page of 69
Display

Click on the first or last page to see other HCD-GPX6 / HCD-GPX7 service manuals if exist.