Read Sony HCD-FX250 Service Manual online
HCD-FX250
7
2-7. BASE UNIT (BU-D1BD73)
Note 1: This illustration sees the top panel block from base unit side.
1 four floating screws
(PTPWH M2.6)
3 two vibration proof rubbers
(red)
4 two vibration proof rubbers
(green)
6 cover (D1)
7 base unit
(BU-D1BD73)
2
5 four claws
Note
2: Four claws might be fixed by bond.
Please fix four claws by the bond when
you replace the cover (D1).
2-8. OPTICAL PICK-UP BLOCK (DA11MMVGP)
1 Remove four solders.
2 Solder the short-land.
4 BD73 board block
Note 2: When assembling the optical pick-up block,
remove the solder of short-land after
connecting the wire (flat type) (16 core).
7 optical pick-up block
(DA11MMVGP)
5 tapping screw (P2)
6 shaft (support)
3 wire (flat type) (16 core) (optical pick-up)
Note 1: When disconnecting the wire (fl at type) (16 core) of optical pick-up block, solder the short-land.
Click on the first or last page to see other HCD-FX250 service manuals if exist.