Read Sony HCD-EX1 Service Manual online
8
3-5. MOTOR ASSY AND CAM
Note:
Adjustment of the phase is required in assembly.Refer to
"Section 1. Servicing Note" for details.
"Section 1. Servicing Note" for details.
Page 11
Slider (3)
Slider (2)
Boss
Boss
Diskholder
Lever (1)
Mecha cover
Motor assy
SW cam
Two screws (BVTT3x5)
Two screws (BVTP2.6x8)
Two screws (BVTP2.6x8)
Three screws (BVTT3x5)
Bracket(CDM)
Two screws (BVTP2.6x8)
Two screws (BVTP2.6x8)
Screws (BTP2.6x8)
Screws (PTPWH2.6x6)
Cam
7
6
8
9
0
qa`
qs
qd
qf
qg
qh
qj
3
4
5
Set the main unit in EJECT status then use the following procedure
to remove it with the slider (2) and the diskholder assembled.
to remove it with the slider (2) and the diskholder assembled.
1
Remove the boss of the slider (2) from the grooves of the
guides (L) and (R).
2
Bend the slider (2) in the direction shown in the figure
to take it from the lever (1) and remove it in the upwards direction.
1
2
3
4
5
6
7
8
9
0
qs
qd
qf
qg
qa`
Two screws (BVTP2.6x8)
Two screws
(BVTP2.6x8)
(BVTP2.6x8)
Guide (L)
Guide (R)
Slider (4)
Slider (4)
Slider (1)
Two screws (PTPWH2.6)
Screws (PTPWH2.6)
Two screws (PTPWH2.6)
Two screws
(PTPWH2.6)
(PTPWH2.6)
Coil spring
Coil spring
BU holder
Pick up assy
3-6. BASE UNIT
Click on the first or last page to see other HCD-EX1 service manuals if exist.