Read Sony HCD-ECL7D Service Manual online
HCD-ECL7D
14
SECTION 3
TEST MODE
SOFTWARE VERSION
It can confi rm the software version.
It can confi rm the software version.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [
Z
] button to open the disc tray.
3. Press the button on the remote commander as following order.
[CLEAR]
→ [
B
]
→ [RETURN]
(Displayed values in the following fi gure are example)
M2272P31
Screen display
MCU version
MPEG version
Model Region
Releasing method
When operating at the remote commander:
Press the [SETUP] button on the remote commander, and it returns
to the display of the normal mode.
When operating at the remote commander:
Press the [SETUP] button on the remote commander, and it returns
to the display of the normal mode.
When operating at the main unit:
Press the [
Press the [
Z
] button, and it returns to the display of the normal
mode.
When operating at TV monitor screen:
1. Press the [
1. Press the [
V] or [v] button on the remote commander, select to
the “EXIT SETUP”.
2. Press the [ ] button on the remote commander, and it returns
to the display of the normal mode.
FACTORY RESET
It can clear all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
It can clear all data including preset data stored in the memory to
initial conditions. Execute this mode when returning the this unit
to the customer.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press two buttons of the [
x
] and [EQ] simultaneously for fi ve
seconds.
3. The message “RESET OK” is displayed on the fl uorescent in-
dicator tube, then returns to the normal mode.
TRAY LOCK
It can be unable to take sample disc out of disc tray in the shop.
It can be unable to take sample disc out of disc tray in the shop.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [
Z
] button to open the disc tray.
3. Set a disc on the disc tray.
4. Press the [
4. Press the [
Z
] button to close the disc tray.
5. Press two buttons of the [
x
] and [
Z
] simultaneously for fi ve
seconds.
6. The message “LOCKED” is displayed on the fluorescent indi-
cator tube and the disc tray is locked.
(Even if pressing the [
Z
] button, the message “LOCKED” is
displayed on the fluorescent indicator tube and the disc tray is
locked)
locked)
Releasing method:
1. Press two buttons of the [
1. Press two buttons of the [
x
] and [
Z
] simultaneously for fi ve
seconds.
2. The message “UNLOCKED” is displayed on the fluorescent
indicator tube and the disc tray is unlocked.
CHILD LOCK
It can lock except for the [
It can lock except for the [
?
/
1
] button of a main unit to prevent
from being operated by mistake.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press the [
x
] button for fi ve seconds.
3. The message “LOCK ON” is displayed on the fl uorescent indi-
cator tube and the except for the [
?
/
1
] button is locked.
(Even if pressing except for the [
?
/
1
] button, the message
“LOCK ON” is displayed on the fl uorescent indicator tube and
the operation is locked)
the operation is locked)
Releasing method:
1. Press the [
1. Press the [
x
] button for fi ve seconds.
2. The message “LOCK OFF” is displayed on the fl uorescent in-
dicator tube and the all buttons are unlocked.
Note: This mode is not released even if it unplugs a power cord.
VFD TEST
It can confi rm the fluorescent indicator tube.
It can confi rm the fluorescent indicator tube.
Procedure:
1. Press the [
1. Press the [
?
/
1
] button to turn the power on.
2. Press two buttons of the [
x
] and [ENTER] simultaneously for
fi ve seconds.
3. All segments on the fluorescent indicator tube light up.
Screen display
4. All segments turn off the light in about 3 seconds, and it re-
turns to the display of the normal mode.
Click on the first or last page to see other HCD-ECL7D service manuals if exist.