HCD-DP800AV, MHC-DP800AV - Sony Audio Service Manual (repair manual). Page 15

15

[CD Section]
• The sequence during the aging mode is following as below.

Disc 1 Chucking

TOC Read

Tray Turn

2 seconds

Track 1 Play

Last Track Play

2 seconds

1. BD Error History Display
11 digits are displayed after the D character.

1st digit

: Indicates the error history number.

0 is the latest error

2nd to 3rd digits

: Indicates details of the problem.

01

: Cannot focus

02

: GFS NG

03

: Start time over

04

: Focus deviates continuously

05

: Q code absent for some time

4th to 5th digits

: Processing when problems occur

01

: Currently SHIP processing

02

: Currently POWER OFF processing

03

: Currently initializing

04

: Currently stopping

05

: Currently STOP operation processing

06

: Currently start processing

07

: Currently TOC reading

08

: Currently searching

09

: Currently playing

0A

: Currently pausing

0B

: Currently PLAY manual searching

0C

: Currently PAUSE manual searching

6th to 7th digits

: Operations currently performed for problems

which have occurred

8th to 9th digits

: Rotation speed of DISC when problems occur

01

: x1 speed

02

: x2 speed

10th to 11th digits : Fixed at 00

2. CDM Error History <CDM58 Error History Display>
11 digits are displayed after the M character.

1st digit

: Indicates the error history number.

0 is the latest error

2nd to 3rd digits

: Indicates the details of the problem.

01 : Initialization table is currently rotating 1
02 : Initialization table is currently rotating 2
03 : Initialization table is currently rotating 3
04 : Currently DISC SKIP in OPEN mode
05 : CLOSE table is currently rotating
06 : Chucking table is currently rotating
07 : Currently performing SHIP operations
08 : Currently performing release operations
09 : Currently performing POWER OFF

operations

4th to 5th digits

: Processing when problems occur

01 : Currently performing SHIP operations
02 : Currently performing POWER OFF

operations

03 : Currently initializing
04 : Currently performing release operations
05 : Currently in chuck stop state
06 : Currently performing CLOSE operations
07 : Currently performing exchange CLOSE

operations

08 : Currently performing OPEN operations
09 : Currently performing OPEN POP UP

operations

0A: Currently performing exchange OPEN

operations

6 to 7th digits

: Operations currently performed for problems

which have occurred

8th to 9th digits

: Targets of processing when problems occur

Same as 4th to 5th digits

10th to 11th digits : Fixed at 00

[CD Ship Mode (No Memory Clear)]
• This mode moves the position to the position durable to vibra-

tion Use this mode when returning the set to the customer after
repair.

Procedure:
1. Press  `/1  button to turn the set ON.
2. Press three  CD  button and  `/1  button simultaneously.
3. After the “STANBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator rube, and the
CD ship mode is set.

[CD Ship Mode (Memory Clear)]
• This mode moves the pickup to the position durable to vibra-

tion. Use this mode when returning the set to the customer after
repair.

Procedure:
1. Press  `/1  button to turn the set ON.
2. Press three buttons  ENTER ,  DISC 1 , and  CD  button

simultaneously.

3. After the “STANDBY” display blinks six times, a message

“LOCK” is displayed on the fluorescent indicator tube, and the
CD ship mode is set.