Read Sony HBD-N590 / HBD-N790W / HBD-N890W / HBD-N990W / HBD-N995W / HBD-T79 Service Manual online
HBD-N590/N790W/N890W/N990W/N995W/T79
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2012.02
New
1.1
2012.05
Deletion of Australian model (HBD-N890W)
Addition of Russian and Taiwan models (HBD-N890W)
Addition of Russian, Mexican, Taiwan and Thai models (HBD-N990W)
Addition of HBD-N995W
Change of Part for C3117, C3120, C3140, C3141, C3317, C3322, C3340, C3341, IC3102 and IC3302
on NX_AMP board
Changing parts supply classifi cation of COVER (BOTTOM)
(SMR-12003)
1.2
2012.06
Addition of TROUBLESHOOTING
(SMR-12017)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.