Read Sony GTK-N1BT Service Manual online
GTK-N1BT
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2013.08
New
1.1
2013.09
Addition of UK, 120V AC area in E, Singapore and Malaysia models
Addition of Ref. No. FC8 and BINDING BAND (AEP and Australian models)
Composition change of SIDE PANEL R BLOCK
(SMR-13024)
1.2
2013.10
Addition of Argentina and Thai models
1.3
2013.12
Addition of Canadian model
Change of FLEXIBLE FLAT CABLE (Ref. No. FFC3 and FFC4)
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.