FST-ZX100D, FST-ZX80D, LBT-ZX100D, LBT-ZX80D, SS-CT100D, SS-WGV100D, SS-ZX100D, SS-ZX100DP, SS-ZX80DP - Sony Audio Service Manual (repair manual). Page 2

Read Sony FST-ZX100D / FST-ZX80D / LBT-ZX100D / LBT-ZX80D / SS-CT100D / SS-WGV100D / SS-ZX100D / SS-ZX100DP / SS-ZX80DP Service Manual online

2
SS-CT100D/WGV100D/ZX80DP/ZX100D/ZX100DP
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
UNLEADED SOLDER
Boards requiring use of unleaded solder are printed with the lead-
free mark (LF) indicating the solder contains no lead.
(Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size)
: LEAD FREE MARK
Unleaded solder has the following characteristics.
•
Unleaded solder melts at a temperature about 40 ˚C higher
than ordinary solder.
Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
Soldering irons using a temperature regulator should be set to
about 350 ˚C.
Caution: The printed pattern (copper foil) may peel away if
the heated tip is applied for too long, so be careful!
•
Strong viscosity
Unleaded solder is more viscou-s (sticky, less prone to flow)
than ordinary solder so use caution not to let solder bridges
occur such as on IC pins, etc.
•
Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
SECTION  1
GENERAL
This section is extracted from
instruction manual.
Subwoofer
 (SS-WGV100D)
2
1
SUBWOOFER ON/OFF 1
SUBWOOFER LEVEL 2
ALPHABETICAL ORDER
A – Z

Display

Click on the first or last page to see other FST-ZX100D / FST-ZX80D / LBT-ZX100D / LBT-ZX80D / SS-CT100D / SS-WGV100D / SS-ZX100D / SS-ZX100DP / SS-ZX80DP service manuals if exist.

Random: