Read Sony FST-SH2000 / LBT-SH2000 / SS-SH2000 Service Manual online
SERVICE MANUAL
Sony Corporation
Published by Sony EMCS (Malaysia) PG Tec
US Model
E Model
SPEAKER SYSTEM
• SS-SH2000 is front speakers in FST-SH2000/LBT-SH2000.
• SS-SH2000P is the package speaker of front speakers in FST-SH2000/LBT-SH2000.
• SS-SH2000P is the package speaker of front speakers in FST-SH2000/LBT-SH2000.
SPECIFICATIONS
SS-SH2000
SS-SH2000P
Ver. 1.2 2012.07
9-890-575-03
2012G08-1
©
2012.07
Speaker
Speaker system
3-way, Bass refl ex
Speaker unit
Subwoofer: 380 mm, cone type
Woofer: 200 mm, cone type
Tweeter: 25 mm, horn type
Rated impedance
High channel: 4 ohms
Low channel: 4 ohms
Dimensions (w/h/d) (Approx.)
510 mm × 720 mm × 500 mm
Mass (Approx.)
28.0
kg
Design and specifi cations are subject to
change without notice.
change without notice.
• JIG
When disassembling the set, use the following jig (for front panel
When disassembling the set, use the following jig (for front panel
removal).
Part No.: J-2501-238-A JIG FOR SPEAKER REMOVAL
2
SS-SH2000
SECTION 1
DIAGRAMS
For Schematic Diagrams.
Note:
•
•
C : panel designation.
•
Signal path
F :
AUDIO
THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
(In addition to this, the necessary note is printed in each block.)
For Printed Wiring Boards.
Note:
•
•
X : Parts extracted from the component side.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
1-1. PRINTED WIRING BOARD
- SPK LED Board - (Front Left/Right)
: Uses unleaded solder.
1-2. SCHEMATIC DIAGRAM - SPK LED Board -
(Front
(Front
Left/Right)
1
A
B
C
2
3
4
SPK LED BOARD
D1801
1L0352B13F0MIT02
1
2
3
2
3
3P
CN1800
LED+13.5V
RED_LED
BLUE_LED
1L0352V22F3MIT02
D1800
Blue LED
Red LED
LED SPEAKER
FRONT
L/R
1
A
B
C
2
3
4
D1800
CN1800
3
1
D1801
1-883-590-
11
(11)
SPK LED BOARD
LED SPEAKER
FRONT
L/R
3
SS-SH2000
NOTE:
• -XX and -X mean standardized parts, so they
• -XX and -X mean standardized parts, so they
may have some difference from the original one.
• Items marked “*” are not stocked since they are
seldom required for routine service.
Some delay should be anticipated when ordering
seldom required for routine service.
Some delay should be anticipated when ordering
these items.
1
4-235-677-01 SCREW (4X20) (TYPE1), +BVTP
2
4-275-958-01 PROTECTOR,
CORNER
3
4-874-614-02 SCREW(1) (3.5X14), TAPPING
4
A-1821-622-A PANEL (L) ASSY, FRONT
4
A-1821-623-A PANEL (R) ASSY, FRONT
5
1-826-143-11 LOUDSPEAKER
(2.5CM)
6
1-858-641-21 LOUDSPEAKER
(20CM)
7
A-1821-624-A PANEL(SW) ASSY, FRONT
8
1-858-640-21 LOUDSPEAKER
(38CM)
9
1-839-128-11 CORD WITH CONNECTOR (L)
9
1-839-128-21 CORD WITH CONNECTOR (R)
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
not supplied
1
not supplied
not supplied
not supplied
not supplied
(SPK LED board)
2
2
2
2
2
2
2
6
8
5
4
7
2
1
1
1
1
1
3
1
3
3
3
3
3
3
9
9
3
SECTION 2
EXPLODED VIEWS
Ver. 1.2
4
SS-SH2000
SECTION 3
ELECTRICAL PARTS LIST
SPK LED BOARD
**************
< CONNECTOR >
CN1800 1-564-719-11 CONNECTOR(SP)(3P)(LED SPEAKER FRONT)
< DIODE >
D1800 6-503-224-02 DI
1L0352V22F3MIT02
D1801 6-503-388-01 DI
1L0352B13F0MIT02
***********************************************************
Ref. No.
Part No.
Description
Remark
Ref. No.
Part No.
Description
Remark
When indicating parts by reference num-
ber, please include the board name.
ber, please include the board name.
Note:
• Due to standardization, replacements in
• Due to standardization, replacements in
the parts list may be different from the
parts specified in the diagrams or the
components used on the set.
parts specified in the diagrams or the
components used on the set.
• -XX and -X mean standardized parts, so
they may have some difference from the
original one.
original one.
• RESISTORS
All resistors are in ohms.
METAL:
All resistors are in ohms.
METAL:
Metal-fi lm resistor.
METAL OXIDE: Metal oxide-fi lm resistor.
F:
F:
nonfl ammable
• Items marked “*” are not stocked since
they are seldom required for routine ser-
vice.
vice.
Some delay should be anticipated when
ordering these items.
• SEMICONDUCTORS
In each case, u:
In each case, u:
μ, for example:
uA.
. :
μA. . , uPA. . , μPA. . ,
uPB.
.
:
μPB. . , uPC. . , μPC. . ,
uPD.
.
:
μPD. .
• CAPACITORS
uF:
uF:
μF
• COILS
uH:
uH:
μH
The components identified by mark
0
or dotted line with mark
0 are critical for
safety.
Replace only with part number specifi ed.
Replace only with part number specifi ed.
• Abbreviation
E2
E2
: 120V AC area in E model
E51
: Chilean and Peruvian models
EA
: Saudi Arabia model
MX
: Mexican model
MY
: Malaysia model
SAF
: South African model
SPK LED
Ver. 1.1
