Read Sony FST-GTK17IP / FST-GTK37IP / RDH-GTK17IP / RDH-GTK37IP (serv.man2) Service Manual online
SERVICE MANUAL
1
SUPPLEMENT-1
Subject: Addition of SERVICING NOTES
File this supplement with the service manual.
Ver. 1.1 2013.05
9-890-615-81
US Model
RDH-GTK37iP
AEP Model
UK Model
Malaysia Model
South African Model
Thai Model
RDH-GTK17iP
E Model
FST-GTK17iP/GTK37iP
Australian Model
RDH-GTK17iP/GTK37iP
FST-GTK17iP/GTK37iP/
RDH-GTK17iP/GTK37iP
FST-GTK17iP/GTK37iP/RDH-GTK17iP/GTK37iP
2
SECTION 1
SERVICING NOTES
NOTE OF REPLACING MB BOARD OR BLUETOOTH
MODULE OR RC-S801/A (WW) BOARD
When the MB board or BLUETOOTH module or RC-S801/A
(WW) board are replaced, please execute the below service mode.
MODULE OR RC-S801/A (WW) BOARD
When the MB board or BLUETOOTH module or RC-S801/A
(WW) board are replaced, please execute the below service mode.
Pairing this system with a
Bluetooth device
1. Press the [
\
/1
] button to turn the power on.
2. Place the Bluetooth device within 1 meter (3 feet) from the
system.
3. Press BLUETOOTH on the unit to select Bluetooth function.
“BT AUDIO” appears in the display panel.
4. Hold down BLUETOOTH on the unit for 2 seconds or more.
“PAIRING”
“PAIRING”
fl ashes in the display panel.
5. Perform the pairing procedure on the Bluetooth device.
6. Select the model number of the unit on the display of the
6. Select the model number of the unit on the display of the
Bluetooth device.
For example, select “SONY FST-GTK37iP” (or FST-
GTK17iP/RDH-GTK37iP/GTK17iP). If passkey is required
on the Bluetooth device, enter “0000”.
GTK17iP/RDH-GTK37iP/GTK17iP). If passkey is required
on the Bluetooth device, enter “0000”.
7. Perform
the
Bluetooth connection on the Bluetooth device.
8. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
panel.
9. To cancel pairing operation, hold down BLUETOOTH on the
unit for 2 seconds or more until “BT AUDIO” appears in the
display panel.
display panel.
Connecting with a smartphone by one touch (NFC)
Note: The operation in this mode must use a NFC-compatible smartphone
(Smartphones with a built-in NFC function [OS: Android 2.3.3 or
later, excluding Android 3.x])
later, excluding Android 3.x])
1. Press the [
\
/1
] button to turn the power on.
2. Download and install the app “NFC Easy Connect”.
Download the free Android app from Google Play by searching
for “NFC Easy Connect”.
for “NFC Easy Connect”.
3. Start the app “NFC Easy Connect” on the smartphone.
Make sure that the application screen is displayed.
4. Touch the smartphone to the N-Mark on the system until the
smartphone vibrates.
Complete the connection by following the instructions
displayed on the smartphone.
5. When pairing is completed and the Bluetooth connection is
established, the Bluetooth device name appears in the display
panel.
panel.
Playing music from a
Bluetooth device
For a Bluetooth device
1. Press the [
\
/1
] button to turn the power on.
2. Press BLUETOOTH on the unit to select Bluetooth function.
“BT AUDIO” appears in the display panel.
3. Establish connection with the Bluetooth device.
The last connected Bluetooth device will be connected
automatically.
automatically.
Perform
the
Bluetooth connection from the Bluetooth device if
the device is not connected.
Once the connection is established, the Bluetooth device name
appears in the display panel.
appears in the display panel.
4. Press
N.
Depending on the Bluetooth device,
– you may have to press N twice.
– you may need to start playback of an audio source on the
Bluetooth device.
Bluetooth device.
For an NFC-compatible smartphone
1. Press the [
\
/1
] button to turn the power on.
Touch the smartphone to the N-Mark on the system to establish
the Bluetooth connection.
the Bluetooth connection.
Start playback of an audio source on the smartphone. For
details on playback, refer to the operating instructions of your
smartphone.
details on playback, refer to the operating instructions of your
smartphone.
To disconnect the Bluetooth device
For a Bluetooth device
For a Bluetooth device
Press BLUETOOTH on the unit.
“BT AUDIO” appears in the display panel.
“BT AUDIO” appears in the display panel.
For an NFC-compatible smartphone
Touch the smartphone to the N-Mark on the system again.
To erase all the pairing registration information perform
COLD RESET test mode (Refer page 31).
COLD RESET test mode (Refer page 31).
MEMO
3
FST-GTK17iP/GTK37iP/RDH-GTK17iP/GTK37iP
FST-GTK17iP/GTK37iP/RDH-GTK17iP/GTK37iP
REVISION HISTORY
Clicking the version allows you to jump to the revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Also, clicking the version at the top of the revised page allows you to jump to the next revised page.
Ver.
Date
Description of Revision
1.0
2013.03
New
1.1
2013.05
Addition of Malaysia, Thai and South African models.
Add CLAMP, SLEEVE FERRITE on page 23, 24, 70 and 86.
Add CLIP, COATING on page 23 and 71.
Add BLUETOOTH MODULE and RC-S801/A (WW) in MISCELLANEOUS section.
Change P/N and description of Q803 in MAIN board.
Change P/N and description of Q930 in SMPS (GTK17iP) board.
Change P/N and description of Q965 in SMPS (GTK37iP) board.
Change P/N of C328, C416, C469, C701, C743, C761, C762, C763, C764, C765, C766, C767, C768,
C769, C770, C771, C772, C821, C824, C830, C833, C840 and C841 in MAIN board.
Change P/N of C930, C932, C971 and C977 in SMPS (GTK17iP) board.
Change P/N of C938, C946, C966, C970, C982 and C983 in SMPS (GTK37iP) board.
Change P/N of CORE, FERRITE in EXPLODED VIEWS and MISCELLANEOUS section.
Change P/N of MANUAL, INSTRUCTION (RUSSIAN, UKRAINIAN) (RU) in ACCESSORIES section.
Change description of D558 and D559 in IP board.
Change description of D009 (GTK37iP) and D010 (GTK17iP) in LED board.
Change description of R192, R193, R194, R806, R833 and R866 in MAIN board.
Change description of Ref. No. 52 and 211 in EXPLODED VIEWS and MISCELLANEOUS section.
Change of USB board, DISPLAY board, KEY board, VOLUME board, IR board, SMPS board
(GTK17iP) and SMPS board (GTK37iP) (Suffi x 12).
Delete of +BVTP2.6 (3CR), CUSHION (E), CUSHION (H) and LID, BATTERY CASE in
ACCESSORIES section.
Delete of note in SERVICING NOTES (page 4), AUDIO INPUT section (page 47 and 49) and
ELECTRICAL PARTS LIST section (page 77).
Delete of CN102 on MAIN board.
Adding SERVICING NOTES (SUPPLEMENT-1)
