Read Sony DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D Service Manual online
1-6
24
Connecting to an AV amplifier (receiver) with a digital input jack having
a Dolby Digital or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of your AV
amplifier (receiver). You are not able to enjoy the surround sound effects of this player.
amplifier (receiver). You are not able to enjoy the surround sound effects of this player.
Note
After you have completed the connection, be sure to
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” (page 25) in Quick Setup.
Otherwise, no sound or a loud noise will come from
the speakers.
set “DOLBY DIGITAL” to “DOLBY DIGITAL”
and “DTS” to “ON” (page 25) in Quick Setup.
Otherwise, no sound or a loud noise will come from
the speakers.
D
PCM/DTS/
DOLBY DIGITAL
S VIDEO
OUT
COMPONENT
VIDEO OUT
COAXIAL OPTICAL
R-AUDIO-L
VIDEO
R-AUDIO-L
IN
OUT
VIDEO
DIGITAL OUT
LINE
PR
PB
Y
D
PCM/DTS/
DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
Front (R)
Front (L)
Rear (R)
AV amplifier (receiver) having
a decoder
a decoder
Subwoofer
Center
Coaxial digital cord
(not supplied)
(not supplied)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
(not supplied)
Remove jack cap
before connecting
(DVP-NS415 only)
[Speakers]
CD/DVD player
l: Signal flow
[Speakers]
Rear (L)
to optical digital input
or
to coaxial digital
input
input
to DIGITAL OUT
(COAXIAL or
OPTICAL)
(COAXIAL or
OPTICAL)
25
H
ook
up
s
s
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments for using the player.
To skip an adjustment, press
To skip an adjustment, press
>. To return to the previous adjustment, press ..
1
Turn on the TV.
2
Press
[/1.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
“Press [ENTER] to run QUICK SETUP”
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Bar to run Quick Setup (page 58).
appears at the bottom of the screen. If this
message does not appear, select
“QUICK” under “SETUP” in the Control
Bar to run Quick Setup (page 58).
4
Press ENTER without inserting a
disc.
disc.
The Setup Display for selecting the
language used in the on-screen display
appears.
language used in the on-screen display
appears.
5
Press
X/x to select a language.
The player uses the language selected
here to display the menu and subtitles as
well.
here to display the menu and subtitles as
well.
6
Press ENTER.
The Setup Display for selecting the
aspect ratio of the TV to be connected
appears.
aspect ratio of the TV to be connected
appears.
7
Press
X/x to select the setting that
matches your TV type.
◆ If you have a 4:3 standard TV
• 4:3 LETTER BOX or 4:3 PAN SCAN
• 4:3 LETTER BOX or 4:3 PAN SCAN
(page 59)
◆ If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
• 16:9 (page 59)
standard TV with a wide-screen mode
• 16:9 (page 59)
8
Press ENTER.
The Setup Display for selecting the type
of jack used to connect your amplifier
(receiver) appears.
of jack used to connect your amplifier
(receiver) appears.
ENTER
DVP-NS315
DVP-NS415
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
MENU:
AUDIO:
SUBTITLE:
FRENCH
ENGLISH
ENGLISH
ENGLISH
SPANISH
PORTUGUESE
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
SCREEN SAVER:
BACKGROUND:
4:3 LETTER BOX
4:3 PAN SCAN
16:9
4:3 LETTER BOX
,continued
26
9
Press
X/x to select the type of jack
(if any) you are using to connect to
an amplifier (receiver), then press
an amplifier (receiver), then press
ENTER.
Choose the item that matches the audio
connection you selected on pages 21 to
24 (
connection you selected on pages 21 to
24 (
through
).
• If you connect just a TV and nothing
else, select “NO.” Quick Setup is
finished and connections are complete.
finished and connections are complete.
• Select “LINE OUTPUT L/R
(AUDIO).” Quick Setup is finished and
connections are complete.
connections are complete.
• Select “DIGITAL OUTPUT.” The Setup
Display for “DOLBY DIGITAL” appears.
10
Press
X/x to select the type of
Dolby Digital signal you wish to
send to your amplifier (receiver).
send to your amplifier (receiver).
Choose the signal that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• D-PCM (page 62)
• DOLBY DIGITAL (only if the
amplifier (receiver) has a Dolby Digital
decoder) (page 62)
decoder) (page 62)
11
Press ENTER.
“DTS” is selected.
12
Press
X/x to select whether or
not you wish to send a DTS signal
to your amplifier (receiver).
Choose the item that matches the audio
connection you selected on pages 22 to
24 (
connection you selected on pages 22 to
24 (
through
).
• OFF (page 62)
• ON (only if the amplifier (receiver) has
a DTS decoder) (page 62)
13
Press ENTER.
Quick Setup is finished. All connections
and setup operations are complete.
and setup operations are complete.
Enjoying the surround sound
effects
effects
To enjoy the surround sound effects of this
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
player or your amplifier (receiver), set the
following items as described below for the
audio connection you selected on pages 22 to
24 (
through
). Each of these is the
default setting and does not need to be adjusted
when you first connect the player. Refer to
page 57 for using the Setup Display.
when you first connect the player. Refer to
page 57 for using the Setup Display.
Audio Connection (pages 21 to 24)
• No additional settings are needed.
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 61)
• If the sound distorts even when the volume
is turned down, set “AUDIO ATT” to “ON”
(page 61)
(page 61)
• Set “DOWNMIX” to “DOLBY
SURROUND” (page 61)
• Set “DIGITAL OUT” to “ON” (page 61)
YES
NO
Is this player connected to an amplifier
(receiver) ? Select the type of jack you
are using.
(receiver) ? Select the type of jack you
are using.
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
A
D
A
B-1
C-1
B-2
C-2
D
B
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
DTS:
DTS:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DOLBY DIGITAL
D-PCM
B-2
C-2
D
AUDIO SETUP
AUDIO ATT:
AUDIO DRC:
AUDIO DRC:
DIGITAL OUT:
DOLBY DIGITAL:
OFF
STANDARD
ON
DOWNMIX:
DOLBY SURROUND
D-PCM
DTS:
OFF
OFF
OFF
ON
B
D
B-2
C-2
D
B
D
A
B-1
C-1
B-2
C-2
D
27
Pl
ay
in
in
g Di
sc
s
Playing Discs
Playing Discs
Depending on the DVD or VIDEO CD, some
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
operations may be different or restricted.
Refer to the operating instructions supplied
with your disc.
1
Turn on your TV.
2
Press
[/1.
The player turns on and the power
indicator lights up in green.
indicator lights up in green.
3
Switch the input selector on your
TV so that the signal from the
player appears on the TV screen.
◆ When using an amplifier (receiver)
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
Turn on the amplifier (receiver) and
select the appropriate channel so that you
can hear sound from the player.
4
Press
A on the player, and place a
disc on the disc tray.
5
Press
H.
The disc tray closes, and the player starts
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 32.
playback (continuous play). Adjust the
volume on the TV or the amplifier
(receiver).
Depending on the disc, a menu may
appear on the TV screen. For DVDs, see
page 32. For VIDEO CDs, see page 32.
To turn off the player
Press
Press
[/1. The player enters standby mode.
z Hint
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 60).
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set “AUTO
POWER OFF” in “CUSTOM SETUP” to “ON”
(page 60).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
analog stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analog stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
• Set the sound to “STEREO” using the
AUDIO button when you play DTS sound
tracks on a CD (page 43).
tracks on a CD (page 43).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if “DTS” in “AUDIO SETUP” is
set to “OFF” in the Setup Display (page 62),
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if “DTS” in “AUDIO SETUP” is
set to “OFF” in the Setup Display (page 62),
AUDIO
[/1
A
H
/Playback Dial
Power
indicator
indicator
DVP-NS315
DVP-NS415
MODE CHANGE
(DVP-NS415 only)
(DVP-NS415 only)
With the playback side facing down
,continued
Click on the first or last page to see other DVP-NS305 / DVP-NS310 / DVP-NS315 / DVP-NS405 / DVP-NS410 / DVP-NS415 / HT-1700D service manuals if exist.