DVP-NC675P, HT-4800DP, HT-5800DP, HT-6800DP - Sony Audio Service Manual (repair manual). Page 10

1-4

A

Connect the yellow plug of the audio/video cord (supplied) to the yellow (video) jacks. You will 
enjoy standard quality images.

Use the red and white plugs to connect to the audio input jacks (page 21). (Do this if you are 
connecting to a TV only.)

B

Connect an S VIDEO cord (not supplied). You will enjoy high quality images.

C

Connect the component via the COMPONENT VIDEO OUT jacks using a component video 
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will 
enjoy accurate color reproduction and high quality images. If your TV accepts progressive 
(480p) format signals, you must use this connection and set NORMAL/PROGRESSIVE switch 
to PROGRESSIVE (page 67). The PROGRESSIVE indicator lights up when the player outputs 
progressive signals.

When connecting to a wide screen TV
Depending on the disc, the image of some discs may not fit your TV screen. If you want to 
change the aspect ratio, please refer to page 66.

• Connect the player directly to the TV. If you pass the player signals via the VCR, you may not receive a 

clear image on the TV screen.

• Consumers should note that not all high definition television sets are fully compatible with this product and 

may cause artifacts to be displayed in the picture. In the case of 480 progressive scan picture problems, it 
is recommended that you switches the connection to the standard definition output. If there are questions 
regarding your Sony TV set’s compatibility with this model 480p DVD player, please contact our customer 
service center.

Yellow (Video)

White (L)

Red (R)

Yellow (Video)

White (L)

Red (R)

Green

Blue

Red

Green

Blue

Red

VCR

CD/DVD player

TV

Connect 
directly

c continued

Refer to the chart below to select the connection that best suits your system. Be sure to also read 
the instructions for the components you wish to connect.

Select one of the following connections, 

 through 

. 

z

If you connect an AV amplifier (receiver) that 
conforms to the 96 kHz sampling frequency, use 
connection

 

.

 * Manufactured under license from Dolby 

Laboratories. “Dolby,” “Pro Logic,” and the 
double-D symbol are trademarks of Dolby 
Laboratories.

** “DTS” and “DTS Digital Out” are trademarks 

of Digital Theater Systems, Inc.

 (page 21) Example

Stereo amplifier (receiver) and two speakers
or
MD deck/DAT deck

 (page 22) Example

 (page 23) Example

 (page 24) Example

This connection will use your TV’s speakers for sound.

* The yellow plug is used for video signals (page 

18).

z

When connecting to a monaural TV, use a stereo-
mono conversion cord (not supplied). Connect the 
LINE OUT L/R (AUDIO) jacks to the TV’s audio 
input jack.

S VIDEO OUT

LINE OUT

COMPONENT

VIDEO OUT

DIGITAL OUT

COAXIAL

OPTICAL

VIDEO

PR

Y

PB

PCM/DTS/

DOLBY
DIGITAL

NORMAL

PROGRESSIVE

LINE OUT

R-AUDIO-L

LINE OUT

R-AUDIO-L

TV

l : Signal flow

CD/DVD player

(white)

(red)

Audio/video 
cord (supplied)

to audio input

(yellow)*

(white)

(red)

(yellow)*

to LINE OUT L/R (AUDIO)

c continued

If the stereo amplifier (receiver) has audio input jacks L and R only, use 

. If the amplifier 

(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use 

. 

In this case, you can also connect the player directly to the MD deck or DAT deck without using 
your stereo amplifier (receiver).

S VIDEO OUT

LINE OUT

COMPONENT

VIDEO OUT

VIDEO

PR

Y

PB

NORMAL

PROGRESSIVE

DIGITAL OUT

COAXIAL

OPTICAL

PCM/DTS/

DOLBY
DIGITAL

LINE OUT

R-AUDIO-L

PCM/DTS/

DOLBY

DIGITAL

DIGITAL OUT

COAXIAL

OPTICAL

LINE OUT

R-AUDIO-L

CD/DVD player

or

Stereo amplifier (receiver)

MD deck/DAT deck

Front (L)

Front (R)

[Speakers]

(white)

(red)

(red)

(white)

Coaxial digital 
cord (not supplied)

Stereo audio cord 
(not supplied)

to audio input

to coaxial or optical 
digital input

to LINE OUT L/R (AUDIO)

to DIGITAL OUT 
(OPTICAL or COAXIAL)

l: Signal flow

Optical digital cord 
(not supplied)
Remove jack cap 
before connecting.

or