Read Sony DTC-A8 / PCM-2600 / PCM-2800 Service Manual online
— 88 —
Test Mode II (Test Display, Operation Mode Setting)
When inputting “Numerical key”
n “Numerical key” n “TEST” at the normal display, the display shown in
Table 8-
2
is shown or the operation mode is set.
Example)To light up all the display tubes, input “8”
n “9” n “TEST”.
Table 8-2. Operation Mode Setting and Display
Remote Control Operation
Contents
“8”
n “0” n
“TEST”
“8”
n “1” n
“TEST”
“8”
n “2” n
“TEST”
“8”
n “3” n
“TEST”
“8”
n “4” n
“TEST”
“8”
n “5” n
“TEST”
“8”
n “6” n
“TEST”
“8”
n “7” n
“TEST”
“8”
n “8” n
“TEST”
“8”
n “9” n
“TEST”
“9”
n “0” n
“TEST”
“9”
n “1” n
“TEST”
Factory setting (AUTO ON, SKIP/REPEAT OFF, CLOCK STOP)
DIGITAL OPTICAL IN mode......(*)
DIGITAL COAXIAL IN mode......(*)
LINE IN mode
KEY information display mode
LONG REC mode
STANDARD REC mode
Drum operating time display mode
Drum operating time display mode
(Reset by the DPG adjustment performed after drum replacement)
Display all lit mode
No. of cassette compartment operations display mode (Hexadecimal)
Error rate display mode
A
ππππ ππππ
(Ach) (Bch)
(*) : The DIGITAL IN mode of PCM-2600/2800 is the same.
COAXIAL or AES/EBU is set according to the selection
of the back panel slide switch.
of the back panel slide switch.
Click on the first or last page to see other DTC-A8 / PCM-2600 / PCM-2800 service manuals if exist.