Read Sony DHC-MD777 / HMC-MD777 Service Manual online
– 7 –
POWER SUPPLY DURING SERVICING
• As this set has not own power supply, it does not operate inde-
pendently. Therefore, during servicing, connect it to the Pre-
Main amplifier and Tuner Unit (STR-MD777) of DHC-MD777.
Main amplifier and Tuner Unit (STR-MD777) of DHC-MD777.
If STR-MD777 are not available, use the Power Feed Jig (PFJ-
1) and Relay Connector Jig.
In this case, after turn on the POWER switch on the Power Feed
Jig, supply power with the following methods.
1) and Relay Connector Jig.
In this case, after turn on the POWER switch on the Power Feed
Jig, supply power with the following methods.
– CD Section –
Press the
[REPEAT]
and
[1/ALL]
buttons simultaneously.
(Power is turned off, when press the
[CLEAR]
and
[1/ALL]
button simultaneously)
– MD Section –
Insert the disc in the any MD disc slot.
Note:
Enter the test mode, when Insert the disc while pressing
the both
[ENTER/YES]
and
π buttons
(or
[ENTER/YES]
button only).
Connection:
Set
SYSTEM CONTROL terminal
SYSTEM CONTROL terminal
Connector cable (15P)
Pre-Main AMP
and Tuner Unit
and Tuner Unit
AC IN
Relay connector jig
(J-2501-166-A)
(J-2501-166-A)
FH-E939,838,737
MHC-6600,5600,
3600,2600
CDP/TC
MHC-6600,5600,
3600,2600
CDP/TC
CN103
CN201 (15P)
SYSTEM CONTROL terminal
SYSTEM CONTROL terminal
Set
Connector cable
CN102
FH-E828
FH-E929
FH-E929
MHC-2300
MHC-3500
MHC-5500
MHC-3500
MHC-5500
ST
Power feed jig
(PFJ-1)
(PFJ-1)
17P
15P
Click on the first or last page to see other DHC-MD777 / HMC-MD777 service manuals if exist.