Read Sony DHC-AZ3DM / DHC-AZ7DM / HCD-AZ3DM / HCD-AZ7DM Service Manual online
2
HCD-AZ3DM/AZ7DM
Notes on chip component replacement
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be
damaged by heat.
Flexible Circuit Board Repairing
•
Keep the temperature of the soldering iron around 270 ˚C
during repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation
exposure.
other than those specified herein may result in hazardous radiation
exposure.
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK
0
OR DOTTED LINE
WITH MARK
0
ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE
PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR
IN SUPPLEMENTS PUBLISHED BY SONY.
This appliance is
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
classified as a CLASS 1
LASER product. This
marking is located on the
rear exterior.
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the screen and the front panel display. In this
case, check the following table.
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the screen and the front panel display. In this
case, check the following table.
Self-diagnosis Function
(When letters/numbers appear in the
display)
display)
First 3
characters of
the service
number
characters of
the service
number
Cause and/or corrective action
C 13
The disc is dirty.
,Clean the disc with a soft cloth .
,Clean the disc with a soft cloth .
C 31
The disc is not inserted correctly.
,Restart the system, then reinsert
,Restart the system, then reinsert
the disc correctly.
E XX
(xx is a number)
To prevent a malfunction, the
system has performed the self-
diagnosis function.
,Contact your nearest Sony
system has performed the self-
diagnosis function.
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
service facility and give the 5-
character service number.
Example: E 61 10
SELF DIAGNOSIS FUNCTION
Tun er section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
87.5 – 108.0 MHz
(50-kHz step)
(50-kHz step)
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,602 kHz
(with the interval set at
9 kHz)
(with the interval set at
10 kHz)
531 – 1,602 kHz
(with the interval set at
9 kHz)
Antenna
AM loop antenna
Antenna terminals
External antenna terminal
Intermediate frequency
450 kHz
General
Power requirements
Australian model:
Australian model:
230 – 240 V AC, 50 /60 Hz
Indian model:
220 –240 V AC,
50/60 Hz
50/60 Hz
Thai model:
220 V AC, 50/60 Hz
Korean model:
220 V AC , 60 Hz
Other models:
120 V, 220 – 240 V AC ,
50/60 Hz
Adjustable with voltage
selector
50/60 Hz
Adjustable with voltage
selector
Power consumption
HCD-AZ7DM
HCD-AZ7DM
180 watts
HCD-AZ3DM
110 watts
Dimensions (w/h/d)
HCD-AZ7DM
HCD-AZ7DM
Approx. 190 381
317 mm
317 mm
HCD-AZ3DM
Approx. 190 381
317 mm
317 mm
Mass
HCD-AZ7DM
HCD-AZ7DM
Approx. 6.4 kg
HCD-AZ3DM
Design and specifications are subject to change
without notice.
without notice.
Approx. 5.9 kg
Click on the first or last page to see other DHC-AZ3DM / DHC-AZ7DM / HCD-AZ3DM / HCD-AZ7DM service manuals if exist.