Read Sony DAV-X1G / HCD-X1G Service Manual online
6
HCD-X1G
DMB10 BOARD SERVICE POSITION
• In checking the DMB10 board, prepare four extension jigs (Part No. J-2501-239-A: 1.00 mm Pitch, 5 cores, Length 300 mm, Part No.
J-2501-242-A: 1.00 mm Pitch, 11 cores, Length 300 mm and Part No. J-2501-280-A: 5 cores, Length 300 mm).
Note:
Follow the disassembly procedure in the numerical order given.
HOW TO OPEN THE LOADING ASSY PANEL WHEN POWER SWITCH TURNS OFF
1
Open the cover dust.
2
Slide the chuck cam in the direction
of arrow to release the chucking.
of arrow to release the chucking.
3
Draw out the loading assy panel
in the direction of the arrow.
in the direction of the arrow.
DMB10 board
(CN401)
(CN401)
MAIN board
(CN508)
(CN508)
DMB10 board
(CN4501)
(CN4501)
DMB10 board
(CN106)
(CN106)
Connect extension jig (J-2501-280-A) to the
MAIN board (CN508) and DMB10 board (CN401).
MAIN board (CN508) and DMB10 board (CN401).
Connect extension jig (J-2501-242-A) to the
MAIN board (CN504) and DMB10 board (CN4501).
MAIN board (CN504) and DMB10 board (CN4501).
Connect extension jig (J-2501-242-A) to the
MAIN board (CN503) and DMB10 board (CN106).
MAIN board (CN503) and DMB10 board (CN106).
Connect extension jig (J-2501-239-A) to the
DMB10 board (CN202) and MS-203 (CN001) board.
DMB10 board (CN202) and MS-203 (CN001) board.
Note: Don’t remove the
wire (flat type) 24 core (CN101).
If you remove the
wire (flat type) 24 core (CN101),
solder the bridge of optical pick-up.
If you remove the
wire (flat type) 24 core (CN101),
solder the bridge of optical pick-up.
MAIN board
(CN503)
(CN503)
MAIN board
(CN504)
(CN504)
DMB10 board
(CN202)
(CN202)
DMB10 board
(CN101)
(CN101)
wire (flat type) 24 core
MS-203 board
(CN001)
(CN001)
Click on the first or last page to see other DAV-X1G / HCD-X1G service manuals if exist.